Diver qualification - diving operation for bridge inspection, Civil Engineering

Assignment Help:

Define Diver Qualification - Diving Operation for Bridge Inspection?

The requisite qualification for divers and diving supervisors are given in IS 10291 -1982, which stipulates that the diver:

- Should be at least 18 years of age.

- Should be certified as being fit for diving by a qualified medical practitioner within the previous six months.

- Should be satisfactorily checkedto the maximum pressure he is to work in diving dress in water, or to an equal pressure in a compression chamber.

- Should comprise thorough knowledge of diving signals (IS 10291).

- Should be competent in the use of helmet, diving equipments.

- Should be able to conduct a circular search in the bottom under conditions of no visibility and in at least 0.6m depth of mud or soft silt.

 - Should be capable to work on platform suspended under water.


Related Discussions:- Diver qualification - diving operation for bridge inspection

Calculate the volume of excavation, Calculate the Volume of Excavation ...

Calculate the Volume of Excavation Using the information given in Figure, the volume of excavation in yd 3 is most nearly:   Solution: Use the average end area meth

Explain sedimentation, Explain Sedimentation 1. Sedimentation bas...

Explain Sedimentation 1. Sedimentation basin or clarifier is used to remove particles that will settle in a reasonable time period 2. Basins are usually rectangular or

Structural analysis, steps to analysis a portal frame with sway condition

steps to analysis a portal frame with sway condition

Determine the flow rate from the dewatering well, A construction project in...

A construction project involves excavation below grade. A 24 inch diameter dewatering well is installed from grade (EL 586) to 80 ft below grade to lower the water table. Soil bori

Determine the Critical Euler Buckling Load, a) Determine the critical Eule...

a) Determine the critical Euler buckling load of a solid aluminium rod of 12 mm diameter if it has a length of 1.0 m between pin-ended supports. (E = 70000 N/mm2)       b) A

Highway transportation, HIGHWAY TRANSPORTATION: Broadly, there are two...

HIGHWAY TRANSPORTATION: Broadly, there are two classes of roads: (a)        Urban, and (b)       Rural (Non-urban). Urban roads are those which are located within tow

What should be the hydrometer reading, A litre of suspension containing 0.5...

A litre of suspension containing 0.5 N of soil with a specific gravity of 2.70 is prepared for a hydrometer test. When no temperature correction is considered necessary, what shoul

Find out load carrying capacity, Q.for ISMB200 having 6.70 m span simply su...

Q.for ISMB200 having 6.70 m span simply supported so find out load carrying capacity.

Define limitations of underwater magnetic particle testing, Define Limitati...

Define Limitations of Underwater Magnetic Particle Testing? As with any non-destructive test method, UWMT has some limitations as under: i. Underwater magnetic particle tes

Write Your Message!

Captcha
Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd