Define radiography - underwater inspection of bridge, Civil Engineering

Assignment Help:

Define Radiography - Underwater Inspection of Bridge?

Radiographic non-destructive examination of components is based on the phenomenon that materials absorb radiation energy as it passes through them. The amount of energy absorbed depends on several factors, the main ones being the density of the material and the path length in that material. As a rough guide, greater the density of the material and longer the path length, the greater the radiation absorption. In this method, x-rays and γ-rays are used to detect those features that have an appreciable thickness in a direction parallel to the radiation beam. Discontinuities, which have measurable thickness in all directions, can be detected as long as they are not too small in relation to the section thickness. Radiography is more effective when the flaws are not planar.

The radioactive isotope emitting x-rays or γ-rays is secured to the work site and the films in a light proof and watertight cassette is secured on the opposite side. The source is so close to one surface that it does not register on the film, and only the far wall is recorded. Multiple exposures are required in order to achieve all round coverage. Divers are employed to place the source in its secured and safe condition, as well as the film cassette. After securing the source and the cassette at desired location, diver is withdrawn to a safe location. Source is exposed for the correct time by remote control. On completion of the exposure, the source is secured into its safe condition by remote control. Once this has been verified by remote control video camera, the diver is sent to move the source to the next exposure position. This procedure is used for each exposure until total coverage has been obtained.


Related Discussions:- Define radiography - underwater inspection of bridge

Water curing, what will happen if the water curing is in of and on

what will happen if the water curing is in of and on

Trusses design, does the truss pitch relate to the building''s height?

does the truss pitch relate to the building''s height?

State the importance of structural element, State the importance of structu...

State the importance of structural element If this structural element is used as a beam element, subjected to self load and other imposed transverse loads, then the bottom fibr

Mr Kamal Saxena, What is WBM road. How it is constructed?

What is WBM road. How it is constructed?

Systems approach to diagnose and solve the chronic w, systems approach to d...

systems approach to diagnose and solve the chronic water crisis in the city.

Zero energy building, This is our final year project can u suggest some tip...

This is our final year project can u suggest some tips to do well...

Cement, CEMENT Cement is a normally used binding material in the constr...

CEMENT Cement is a normally used binding material in the construction. By burning a mixture of argillaceous (clay) and calcarious (calcium)  material at a very high temperature

Lead products in construction, What are the advantages and disadvantages of...

What are the advantages and disadvantages of lead products in construction? Ans) Disadvantages: -Lead is very toxic; its use can result in pollution of the ground and more signi

Write Your Message!

Captcha
Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd