Define design aspects of pot bearing, Civil Engineering

Assignment Help:

Define Design Aspects of Pot Bearing?

Basic elements of a POT bearing are:

- POT or a shallow cylinder

- An elastomeric pad

- A set of sealing rings

- A piston

POT bearings are fixed against all translation unless they are used with a PTFE sliding surface. The POT may either be one piece construction shaped by machining or fabricated by welding ring on to the base plate. The elastomer pad inserted into the POT is restrained from being squeezed out of the annular gap between the side wall and the piston by means of a set of two or three flat brass rings. The circular rings have traditionally been brazed into a closed circle, whereas the flat ones are usually bent from a strip and the ends are not joined. Brass rings are placed in a recess on the top of the elastomeric pad.

PTFE rings have been tried, but have been abandoned because of their poor performance. The cover piston which fits into the POT is placed in contact with the elastomer pad. In the POT type sliding bearing the cover/piston is mounted by a sliding assembly. The upper surface of the piston is recessed and filled with the PTFE disc. The upper sliding plate is provided with a sheet of stainless steel or chrome nickel alloy steel. The PTFE disc is provided with small cavities (lubrication pockets) containing a special lubricant which ensure lifelong lubrication of the sliding surface. An all around seal is provided to prevent ingress of moisture and dust on the contact surface as well as inside the POT. Generally four holes are drilled in the top plate as well as the plate on which POT is mounted to facilitate attachment of the POT bearings to the girders and bed block. The PTFE-steel contact surface can also be in the form of two hemispheres in which case the bearing provides for rotation as well as translation.


Related Discussions:- Define design aspects of pot bearing

Design a water supply scheme for new railway colony, Q. Design a water supp...

Q. Design a water supply scheme for new Railway colony based on the following data's. i. Requirement of Loco and domestic consumption 5 lacs gallon per day. ii. Source of wat

Penetration test, Penetration Test: A viscosity is measured indirectl...

Penetration Test: A viscosity is measured indirectly by the penetration of a standard needle under standard conditions of load, time and temperature. The test measures the ha

What is thermodynamics?, Thermodynamics is concerned with the conversion of...

Thermodynamics is concerned with the conversion ofheat into mechanical energy or vice versa.  Heat usually generated through combustion of fossil fuelor nuclear reaction. Exa

Explain the influence line-moment, Influence line-moment 1.  Replace th...

Influence line-moment 1.  Replace the point of interest with an imaginary hinge. 2.  Rotate the beam one unit rotation by apply equal but opposite moments to each of the two

Sway porta frame, how to sway portal frame both end fixed due to eccentric ...

how to sway portal frame both end fixed due to eccentric loading with diagram

Standard mixes of concrete, In some nations such as Britain, specification ...

In some nations such as Britain, specification for concrete doesn'tusually require cube tests for standard mixes of concrete. Quality control of standard mixes in Britain is achiev

Explain the system curves - pumping system, Explain the System Curves - Pum...

Explain the System Curves - Pumping System Non-linear plot beginning on the y-axis at the Total Static Head (TSH) and plotted primarily based on the h f .

Functions of a column in a building, What are the functions of a column in ...

What are the functions of a column in a building? Ans) A column is used to handle the weight of the roof and/or the upper floors. Now days, many columns are used for decorative

Strength of materials, distribution of shear stress in triangular section

distribution of shear stress in triangular section

Calculate the square foot of contact area for the formwork, A concrete crew...

A concrete crew will use the available steel form panels measuring 2'-6" wide x 4'-0" high to construct a 40'-6" long by 3'-2" high by 1'-6" wide concrete knee wall. The square

Write Your Message!

Captcha
Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd