Briefly explain the concept of wind-driven ventilation, Civil Engineering

Assignment Help:

Problem

(a) Briefly explain the concept of wind-driven ventilation and outlines its benefits over mechanical/electrical means of ventilation.

(b) Various factors and guidelines need to be considered in designing a building for natural ventilation.

Explain and illustrate on the orientation of building, layout of facade and positioning and size of windows.

Related Discussions:- Briefly explain the concept of wind-driven ventilation

Inbcluded angle of the bearings, Formula of the included angle of the beari...

Formula of the included angle of the bearings?

State the angle of inclination of the failure plane, The stresses at failur...

The stresses at failure on the failure plane in a cohesionless soil mass were: Shear stress = 4 kN/m 2 ; normal stress = 10 kN/m 2 . Verify the resultant stress on the failure plan

Necessity of air voids in bituminous pavement, Q. Necessity of air voids in...

Q. Necessity of air voids in bituminous pavement? If the presence of air voids is too high, it results in an increase of permeability of bituminous pavement. This enables the f

Minor losses using th method of loss coefficients, Minor Losses Using Th Me...

Minor Losses Using Th Method of Loss Coefficients One method of calculating the energy loss as a result of fluid flowing through a device or fitting, each device or fitting has

Define the ultrasonic thickness measurement, Define the Ultrasonic Thicknes...

Define the Ultrasonic Thickness Measurement? Ultrasonic thickness meters measure the thickness of steel by passing an ultrasonic wave through the member. Thickness measurements

Shear stress in beams, derivation for traverse shear stress in beams

derivation for traverse shear stress in beams

Drawbacks of curing by ponding and polythene sheets, Question What are the ...

Question What are the main drawbacks of curing by ponding and polythene sheets ? Answer Purpose of curing is to decrease the speed of heat loss of freshly placed concrete to atm

Defects of timber, what are defects in timber occur due to natural causes?

what are defects in timber occur due to natural causes?

STRENTH OF MATERIAL, WHY WE ARE USING MAMENT OF INERTIA IN STRAIN ENERGY ST...

WHY WE ARE USING MAMENT OF INERTIA IN STRAIN ENERGY STRUCTURE

Define fatigue load test of shock transmission unit, Define Fatigue load te...

Define Fatigue load test of shock transmission unit? This test was carried out for 100,000 cycles for maximum capacity of STU, assuming the worst case that the 'Lock Up Load' i

Write Your Message!

Name

Email id

Message

Verfication Code

User Account

All Pages