Bodies stick together after collision the heat liberated, Mechanical Engineering

Assignment Help:

Two bodies of mass 1 kg and 2 kg move towards each other in mutually perpendicular direction with velocities 3m/s and 2 m/s respectively. If the bodies stick together after collision the heat liberated will be?

Ans) Total momentum before collision=7 units.

After collision M=3 so v=7/3 units,

Final energy=1/2Mv^2=49/6 J

Initial energy= 1/2m1(v1)^2 + 1/2 m2.(v2)^2

                    = 9/2+4=17/2 J

Loss in energy= initial - final=17/2 - 49/6=2/6=1/3= .33 Joules

 


Related Discussions:- Bodies stick together after collision the heat liberated

Shielding gas advantages, SHIELDING GAS ADVANTAGES   Some of the adv...

SHIELDING GAS ADVANTAGES   Some of the advantages of GMAW process as compared to other arc welding process are as follows: It is a continuous welding process and can

Determine hardness of material, Determine hardness of material: Hardne...

Determine hardness of material: Hardness is surface property. It can be defined as resistance of material against permanent deformation of surface in the form of scratch, inde

Define flavorings in iges, Define Flavorings in IGES Flavorings : IGE...

Define Flavorings in IGES Flavorings : IGES contained several ways to capture the same information, which made proper interpretation largely dependent on the particular  "fla

What are the advantages of gear drive, In general, gear drive is useful for...

In general, gear drive is useful for power transmission among two shafts, which are near to each other (at most at 1m distance). In addition, it has maximum efficiency whereas tran

Cam profile, sketch and discuss the uses and application of the following t...

sketch and discuss the uses and application of the following types of cam follower;knife edge,roller and flat ended.

Compute the concentration of li, Aluminum-lithium alloys have been develope...

Aluminum-lithium alloys have been developed by the aircraft industry to reduce the weight and improve the performance of its aircraft. A commercial aircraft skin material having a

Non-ferrous materials, NON-FERROUS MATERIALS: Latest technology has be...

NON-FERROUS MATERIALS: Latest technology has been highly dependent on non-ferrous and alloys for in specific cases they represent the compensation of high strength and low wei

Drag link mechanism, why there is a different angular velocity in the two c...

why there is a different angular velocity in the two cranks of a drag link mechanism?

Process of corrosion in bfw tank, Q. Process of Corrosion in BFW Tank? ...

Q. Process of Corrosion in BFW Tank? The feed to the BFW Tank is hot and will be flashing when it enters the tank. The vapours will be corrosive when the tank is open to atmosp

Induction machine operation, Induction Machine Operation For operation ...

Induction Machine Operation For operation with rated L-L voltage of 230 V and rated frequency of 60 Hz, the performance of a particular 10 hp machine at its rated speed and pow

Christian

6/25/2013 1:51:40 PM

Two bodies of mass 1 kg each move in the same direction with velocities 20 m/s and 10 m/s respectively. If the bodies stick together after collision how much heat is liberated? Would the answer change if one body was at rest and the other moving at 10 m/s ?

Write Your Message!

Captcha
Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd