Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
You are planning a Polaris observation at latitude 42 degrees North when the star is at or near upper culmination. You want to know the error in azimuth that will result from a 1 min timing error. You know that the meridian angle, t, is exactly 0 degrees at upper culmination.
Use the approximations that the celestial sphere rotates once in approximately 24 hours, the declination of Polaris is approximately 89 degrees 10 minutes, and the bearing of Polaris is approximated by the folwing equation: Z = (sint)(p)(coslatitude). The azimuth error resulting from a 1 min timing error is most nearly?
A rectangular channel leading from an upstream lake has a bottom width of 20 ft, bottom slope of 0.0002, a Manning roughness factor of 0.016, a discharge of 403 cfs, and normal depth of 6.24 ft.
The US EPA has published the following data for the release to the Florida environment of sulfuric acid (H2SO4 ), the most widely used industrial chemical (in millions of pounds).
An uneven or abnormal symmetry observed following the stakeout of a horizontal curve is usually an indication of a:
The 2kg block A and the 5kg block B are initially at rest on the inclined plane at 20 degrees. All surfaces in this system have a coefficient of static friction of 0.6 , and a coefficient of kinetic friction of 0.4.
Suppose there were reason to believe that incomes in some population were normally distributed, with a mean of $47,000 per year, and a standard deviation of $5,500 per year.
A 55 KG bungee jumper leaps from a bridge. She is tied to a bungee cord that is 12 m long when unstretched, and falls a total of 31 m. Calculate the spring constant of the bungee cord assuming Hooke's law applies.
A w14X74 of A992 Steel has a length of 20 feet and fixed ends. Compute the design compressive strength for LRFD and the allowable compressive strength for ASD.
A flowrate of 3.5 ft^3/s is to be maintained in a horizontal aluminum pipe ( E = 5 * 10 ^-6 ft). The inlet and outlet pressures are 65 psi and 30 psi, respectively, and the pipe length is 500ft. Determine the diameter of the pipe.
At point 1 and point 2, it is also measured that dv1/dt = 20 m/s^2 and dv2/dt = 50 m/s^2 respectively. Determine the local acceleration, the convective acceleration, and the total acceleration at point 1 and 2 at t = 0
The break up of a liquid jet into droplets of diameter d depends on the jet diameter D, the jet velocity V, viscosity Mu, density rho,and surface tension sigma.
A foot valve for a pneumatic systemis hinged at B. Knowing that a=28degrees, determine the moment of the l6-N force about point B by resolvingthe force into horizontal and vertical components
Two particles have a mass of 8 Kg and 12 Kg respectively. if they are 800 mm apart, determine the force of gravity acting between them. Compare this result with the weight of each particle.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd