You are designing a highway bridge

Reference no: EM13533354

You are designing a highway bridge. In particular you aretrying to determine how to put the road surface on the bridge. Youlive in an area where the maximum summertime temperature is 40degrees centigrade and the minimum winter temperature is -30degrees centigrade. The coefficient of linear expansion,α, measures the fractional change in length per unit change intemperature (fractional change = change in length per unit length).A coefficient of linear expansion will be no larger than 0.0001.Consider a section of road surface with length L1 (or L2) attemperature T. If the temperature T increases by?T the length of the section of road surface withL1=3 will increase by 3?L to L1+3?L. If the temperature decreases by?T a section of road surface with length L2=5will decrease in length by 5?L toL2-5?L. The amount the length changes(per unit length of road surface L=1) by is ?L= ?Tα . You are to write a program to determine two things, the maximum size of the space between road sections and theamount of space to leave between the sections of road surface onthe day they are installed. At the maximum temperature there should be no space between the sections of road surface. You must leave enough room between sections of road surface for the road surface to expand to the length it would haveat the maximum temperature of 40 degrees. The user will provide the temperature on the day the installation takes place, the length of each section of road surface to be installed (at the temperature when the installation occurs) and the coefficient of linear expansion of the material being used in the road surface.

Reference no: EM13533354

Questions Cloud

Determine what pressure head is needed from the pump to : A WTP Operator is trying to size a pump that takes water from a WTP holding tank and sends it to a house on a hill above the plant. The operator's goal is to have 60 psi of water pressure entering the house.

Combined weight of the boatswain chair and the sailor is 90 : A sailor is being rescued using a boatswain's chair that issuspended from a pulley that can roll freely on the support cableACB amd is pulled at a constant speed by cablle CD

What is the maximum and mean velocity of flow : A thin film of oil (v=0.001 m^2/s) 2mmthick flows down to a surface inclined at 30 degrees to thehorizontal. What is the maximum and mean velocity of flow?

Write a short class that shows an increment and decrement : A beam of length 3m with a non-uniform load of zero at end Aand 200N/m at end B i.e a vertical loading of 1/2 *200*3N with abending moment about A of 1/2*200*3*(2/3*3). The beam is supportedat end A for a distance of 0.5 m and a uniform suport force ..

You are designing a highway bridge : You are designing a highway bridge. In particular you aretrying to determine how to put the road surface on the bridge. Youlive in an area where the maximum summertime temperature is 40 degrees centigrade and the minimum winter temperature is -30degr..

What would be her recoil velocity : In a football game, a receiver is standing still, having just caught a pass. Before he can move, a tackler, running at a velocity of +3.1 m/s, grabs him. The tackler holds onto the receiver, and the two move off together with a velocity of +1.6 m/s

Convert the bearings to azimuths from north : Convert the bearings to azimuths from north and compute theangle . smaller then 180 degree. between successive bearings.

How much energy in horsepower islost by the water while flow : A pipeline 1200ft long and 8in. in diameter hasat its inlet point 75ft of available hydraulic energy with respectto the reference level. The velocity in the pipe is 5fps; thepressure at its end is 12psi.

Determine the volume of traffic across the bridge : A bridge has been constructed between the mainland and anisland. The total cost (excluding toll) to travel across thebridge is expressed as C=50+0.5V, where V is the number of veh/dayand C is the cost/vehicle in cents. The demand for travelacross the..

User Account

All Pages