Writing a report about the expriment meter circuits

Assignment Help Electrical Engineering
Reference no: EM131081422

Writing a report about the expriment meter circuits.

Your report should include the following:

1. A discussion of the technique for measuring the meter internal resistance.

2. A discussion of the principles of operation of each of the circuits constructed.

3. A discussion of the equation for the decade box resistance setting in part 2 of step 2.

4. An explanation for the difference in the readings obtained with the two constructed voltmeters.

Laboratory Report Format

1. Each individual shall submit a report. It is understood that group members will have the same set of data to work with.

2. All reports shall be prepared using a word processor.

3. Laboratory reports shall consist of the following parts:

a) Cover sheet.

b) Objective - a short paragraph stating what the experiment is about.

c) Procedure - a description of the process of conducting the experiment. It should not be a step-by-step account, but rather an overview of what was done.

d) Discussion - a complete discussion of the results of the experiment and the principles involved. It is important to state the relevant circuit laws and theorems, and the degree to which the measured results agreed with those expected based on circuit theory. Include circuit schematics, tables of data, plots, and sample calculations as needed to support the statements made in this section. Relegate extensive lists of raw data and detailed computations to an appendix as appropriate.

e) Conclusion - a summary of what you have learned from the experiment.

f) Appendix - original raw data (initialed by the lab instructor) and details not placed in the discussion section.

4. The laboratory reports will be graded based upon appearance, quality of the data, sample calculations, and your discussion of the results and the principles involved. The discussion section will account for approximately 80% of the overall grade.

5. Lab reports are due at the beginning of the subsequent lab meeting, generally one week later. The credit for a lab report will be reduced by 10%/day beyond the due date. If you have a bona fide attendance excuse (illness, funeral, etc.), the due date may be extended if you communicate with the lab instructor in a timely manner.

Reference no: EM131081422

Questions Cloud

Determine the risk level for your potential investment : You are considering investing in the bonds issued by ABC Corporation. They have a coupon rate of 6% and a maturity date of March 21, 2046. ABC Corp is an industrial firm and these bonds are not rated by Moody’s or S&P. As a bond investor what six rat..
Time value of money and discounted cash flow analysis : This week we are studying the time value of money and discounted cash flow (DCF) analysis. In order to use DCF one must make projections of future cash flows. The DFC analysis is therefore only as good as the quality of the projections. For this week..
What strategies can be used to increase ticket sales : What strategies can be used to increase merchandise sales, from the standpoint of both the product selection and promotion during the concert?
Responses of individual americans : The Great Depression plunged the nation into a profound crisis with staggering personal and national costs. How did Americans attempt to ease the impact of these circumstances? In your answer, discuss and compare the responses of individual Americ..
Writing a report about the expriment meter circuits : Writing a report about the expriment meter circuits. Your report should include A discussion of the technique for measuring the meter internal resistance.
Determine and prove whether is convergent and divergent : Math 104: Homework 2. Optional for the enthusiasts. Let s1 = t for t ∈ R, and define sn+1 = sn/2(3 - s2n) for n ∈ N. For all values of t, determine and prove whether sn is convergent, divergent but bounded, or divergent and unbounded
Reflect the mexican revolution : Please refer to my Research Proposal as the paper needs to reflect the Mexican Revolution of 1910. Write a first draft of your research paper. The first draft should be 3,000-3,750 words (approximately 12-15 pages if the template is used correctly)..
What about raising the rent on the properties : What about raising the rent on the properties?
Arrogance of wealth : In 1914 President Woodrow Wilson denounced what material object as a symbol of "the arrogance of wealth"?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate the dopant density represented by silicon cube

The silicon cube you were shown consisted of 4x4x4 unit cells. You were shown one dopant in the silicon cube. Given that the lattice constant of silicon is 0.543 nm. Calculate the dopant density represented by the 4x4x4 silicon cube simulation.

  What is the output power to the load

In a certain transformer, the input power to the primary is 120 W. If 8.5 W are lost to the winding resistance, what is the output power to the load, neglecting any other issues

  Design a 3-bit binary counter and the most significant bit

A clock signal of 100 MHz (10^8 Hz) is available. Design a circuit that generates a sec- ond clock signal of 12.5 MHz. Design a 3-bit binary counter and the most significant bit is the desired clock signal.

  What is the average power in watts needed of a machine

What is the average power in Watts needed of a machine that cools 10 lb/minute of dry air from 20 to 15 degrees Celsius

  Find the correlation coefficient between w and x

Three zero mean, unit variance random variables X,Y, and Z are added to form a new random variable, W = X + Y + Z. Random variables X and Y are uncorrelated, X and Z have a correlation coefficient of 1/2

  What would happen if placed two electrons near each other

Some of the particles comprising atoms react to each other in a way that scientists categorize as electric charge. There are two fundamental types of electric charge: positive and negative.

  Determine how to design mod-11 synchronous counter

How to design ''mod-11 synchronous counter'' and ''divide by 45circuit '' using j-k flip flops.(Including truth tables.) note:J-K flip flops have high (active 1) preset and clear enterance.

  At what time is the instantaneous power flow maximum

On the schematic shown below, two voltages and two currents are given.Find all of the other voltages and write them in the rectangles next to the resistors.

  Determine how many jw poles does the system have

If a seventh-order system has a row of zeros at s^3 and two sign changes below the s^4 row, how many jw poles does the system have

  Determine the value of capacitor and inductance of coil

When placed in series a coil and capacitor resonate at a fequency of 2251Hz and when placed in parallel they resonate at a frequency of 2228Hz. At parallel resonance it is also found that a current of 0.005A flows from the supply when the supply i..

  Determine the armature current and speed

A 300 V, 60 A, 1200 rpm series dc motor has an armature and series field resistance of .2 ohms each. When a .10 ohm resistance is connected in parallel to the winding, the motor's torque is doubled.

  Find the phase velociy of propagation of a coaxial cable

A coax cable has an inducance of 300nH/m and capacitance 53pF/m and carries very high frequency radio waves. Sart with the quantity gamma for transmission line, explain your approximations and find the phase velociy of propagation.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd