Write down an expression for the voltage waveform

Assignment Help Electrical Engineering
Reference no: EM131202840

1. For the circuit given in FIGURE 1 the power factor is 0.72 lagging and the power dissipated is 375 W.

1376_Fig.jpg

Determine the:

(i) apparent power

(ii) reactive power

(iii) the magnitude of the current flowing in the circuit

(iv) the value of the impedance Z and state whether circuit is inductive or capacitive.

2. A 50 kW load operates from a 60 Hz 10 kV rms line with a power factor of 60% lagging. Determine the capacitance that must be placed in parallel with the load to achieve a 90% lagging power factor.

3. A series RLC circuit is connected to a 5 V supply, the frequency of the supply is adjusted to give a maximum current of 11.9 mA at 2.5 kHz. The Q factor is 70. Determine the component values of the circuit.

4. A single phase transformer has the following rating: 120 kVA, 2000 V/100 V, 60 Hz with 1000 primary turns.

Determine:

(a) the secondary turns

(b) the rated primary and secondary currents

(c) the maximum flux

(d) given a maximum flux density of 0.25 T, the cross-sectional area of the core.

5. An a.c. voltage, V, comprises of a fundamental voltage of 100 V rms at a frequency of 120 Hz, a 3rd harmonic which is 20% of the fundamental, a 5th harmonic which is 10% of the fundamental and at a phase angle of 1.2 radians lagging.

(i) Write down an expression for the voltage waveform.

(ii) Sketch the waveforms of the harmonic components.

(iii) Determine the voltage at 20 ms.

(iv) Given an ideal V = 100 V rms, what is the percentage error at 20 ms?

Verified Expert

Given that the power factor is 0.72 lagging and the power dissipated is 375 W (i) To determine the apparent power We know that Apparent power = True Power/ Power Factor

Reference no: EM131202840

Questions Cloud

Find the content of the register after each shift : A 4-bit shift register is shifted six times to the fight. If the initial content of the register is 1101, find the content of the register after each shift if the serial input is 101101.
Find the maximum frequency the counter can operate reliably : A counter uses flip-flops which have a 5 ns delay between the time the clock input goes from 1 to 0 and the time the output is complemented.
How many memory cells must the ram have : If each word in RAM has a unique address, how many words can be specified by an address of 16 bits? If each word is byte long (8 bits long), how many memory cells must the RAM have?
Compute the overhead volume variance : AirPro Corp. reports the following for November. Actual total factory overhead incurred $ 28,175 Standard factory overhead: Variable overhead $ 3.10 per unit produced Fixed overhead ($12,000/12,000 predicted units to be produced) $ 1 per unit Predict..
Write down an expression for the voltage waveform : Write down an expression for the voltage waveform - Sketch the waveforms of the harmonic components and  determine the secondary turns.
Compute the direct material and direct labor variances : Green Tee produces 100 percent cotton t-shirts, with the following standard direct material and labor quantities and costs: What is the standard quantity of material and the standard labor time for Septem- ber’s production? Compute the direct materia..
What is sustainable growth rate-external financing needed : If the Hunter Corp. has an ROE of 15 and a payout ratio of 18 percent, what is its sustainable growth rate? What is the external financing needed?
Prepare journal entries to record the above transactions : Nova Corporation hired a new product manager and agreed to provide her a $23,000 relocation loan on a six-month, 8 percent note. The new employee pays Nova the interest owed on the maturity date. Prepare journal entries to record the above transactio..
Write a paper that include two figures from humanities : Write a paper that include two figures from humanities (one from past and one from present) and compare and contrast their achievements.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is minimum bandwidth of the telephone line to transmit

The output power of the digital transmitter is 0 dBm and the link has a constant attenuation of 50.0 dB. At the input to the receiver, the equivalent AWGN noise power is – 70 dBm. Assume implementation margin is 0 dB when calculating BER in ..

  Design a synchronous sequential circuit with single input

Design a synchronous sequential circuit that has a single input X and an output Y. Y goes to 1 if x(t) = x(t - 2). At all other times Y is to be 0. Use Moore model and JK flip-flop to implement the circuit. (a) Make the state definition

  Change in pe of the two charge system

Two identical particles each with charge q are placed on the x axis. One at the origin and the other at x=5cm. A third particle with charge -q is placed on the x axis so the PE of the three particle system is the same as the PE at infinite separat..

  Find number of channels that can be simultaneously supported

A cellular operator using the FDMA technique is allocated a total spectrum of 25 MHz. The system has a channel bandwidth of 60 kHz. It also uses a guard band of 20 kHz. Compute the number of channels that can be simultaneously supported in this wi..

  Explain verify that the expressions obtained

Use the Z-transform of u[n] and properties of the Z-transform to find X(z). Verify that the expressions obtained above for X(z) are identical.

  What is percentage change of af corresponding to factor

A negative feedback amplifier has a close-loop gain Af=100 and an open-loop gain A=105. What is the feedback factor If a manufacturing error results in a reduction of A to 103, what close-loop gain results

  Find minority carrier concentration at emitter-base junction

A Si p-n-p transistor has impurity concentrations of 5´1018, 2´1017, and 1016 cm-3 in the emitter, base, and collector, respectively. The base width is 1.0mm, and the device cross-sectional area is 0.2 mm2.

  Explain how to implement the linear congruential algorithm

Write a MATLAB script to implement the linear congruential algorithm to generate 5000 pseudo-random variates in the interval (0,1). Use the following parameters: seed=17; A=1103515245; M=2147483648; C=12345.

  Which grating would be easier to fabricate

Which grating would be easier to fabricate?

  How much area doesa bit stored on the inner most track

The bits of data arestored on circular tracks, with 77 tracks per side. The radius of the innermost track is (1/2)", while the radius of the outer most tract is 1(1/2)".The number of bits in one byte. How much area doesa bit stored on the innermos..

  Design circuit for light fixture controlled by four switches

design a circuit for a light fixture controlled by four switches,where flipping one of the switches turns the light on when it isoff and off when it is on. give expression and show using logic gates.

  400/200v single phase transformer with a resistance

A 10 KVA, 400/200V single phase transformer with a resistance of 3% and a reactance of 6% is supplied a current of 50A to a resistive load. the voltage across the load

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd