Write a vba function that receives a gauge pressure

Reference no: EM13548173

1.A 50-m tape is used to measure between two points. The average weight of the tape per meter is 0.320 N. If the measured distance is 48.888 m, with the tape supported at the ends only and with a tension of 100 N, Find the corrected distance.

2.Write a VBA function that receives a gauge pressure and barometric pressure and then returns the absolute pressure. Have the function check whether the barometric pressure is zero, indicating that the program should use a default value of 1 atmosphere (or 14.696 psia) to the gauge pressure to calculate the absolute pressure

Reference no: EM13548173

Questions Cloud

What was its interest expense : Molteni Motors Inc. recently reported $3.25 million of net income. Its EBIT was $6.75 million, and its tax rate was 35%. What was its interest expense? Round your answer to the nearest dollar.

Generally have interest in unionizing : which of the following groups do not generally have interest in unionizing?

Capstone project overview : Capstone Project Overview

How far from existing station mark on first street would : The point of intersection of the centerline of Elm Road with the centerline of first Street was originally recorded (using a 30-m steel tape) as being at 6 + 71.225. How far from existing sation mark 5 + 00 on first street would a surveyor have to

Write a vba function that receives a gauge pressure : A 50-m tape is used to measure between two points. The average weight of the tape per meter is 0.320 N. If the measured distance is 48.888 m, with the tape supported at the ends only and with a tension of 100 N, Find the corrected distance.

What horsepower must be supplied to the pump in order : A pump of 80% efficiency lifts water from one large open tank to another; the difference in water surface elevations is 20 feet. The pipe is relatively smooth (f = 0.0122), and has 3 elbows, each with a loss coefficient of 2/3.

Determine the prism constant : To verify the constant of a particular prism, a straight line EFG is laid out. The EDM instrument is first set up at E, with the following measurements recorded: EG = 426.224 m, EF = 277.301 m

Compute the required layout distance if the temperature : A distance of 72.55 ft is recorded using a steel tape weighing 0.016 lb per foot. The tapes is supported only at the ends with a tension of 15 lb. Find the distance corrected for sag.

The pipe entrance is flush and square edged : Water flows through 800 feet of 12-inch diameter iron pipe (? = 0.0018 inches) between 2 open storage tanks, whose water surface elevation difference is 16 feet. The pipe entrance is flush and square edged

User Account

All Pages