Write a user friendly computer program to design torsion

Assignment Help Civil Engineering

Reference no: EM13563841

1.Write a user friendly computer program to design torsion reinforcement in rectangular and flanged beams, and plot the cross-sectional reinforcement details on a graphic plotter

2.Design a circular overhead water tank of 200 kL capacity over a staging of 25 m. Assume suitable proportions and prepare detailed structural drawings

3.The velocity of a particle traveling along a straight line is v=(3t^2-6t) ft/s , where t is in seconds. if s=4ft when t=0 determine the position of the particle when t=4s? what is the total distance during the time interval t=0 to t=4s? for the total distance

4.Given an 18-in. concrete conduit with a roughness coefficient of n = 0.013, s = 0.02, and a discharge capacit of 15 cfs, what diameter pipe is required to triple the capacity?

Reference no: EM13563841

Questions Cloud

Calculate the depth of flow upstream of the bridge : Calculate the depth of flow upstream of the bridge assuming that the pier coefficient of drag is 1.2. Drag Force CD Af (V1^2)/2 CD=1.2

Determine the velocity of flow find the discharge in cfs : Given a V-shaped channel with a bottom slope of 0.001, a top width of 12ft, and a depth of 6 ft, determine the velocity of flow. Find the discharge in cfs and m^3/s.

Determine the max velocity and acceleration of b : A brass (nonmagnetic) block A and a steel magnet B are in equilibrium in a brass tube under the magnetic repelling force of another steel magnet C located at a distance x=.004 m from B

Determine the deviation at the top of the trajectory caused : A fireworks shell is launched vertically from point A with speed sufficient to reach a maximum altitude of 500ft. A steady horizontal wind causes a constant horizontal acceleration of 0.5ft/sec^2, but does not affect the vertical motion. Determine th..

Write a user friendly computer program to design torsion : Write a user friendly computer program to design torsion reinforcement in rectangular and flanged beams, and plot the cross-sectional reinforcement details on a graphic plotter

Determine distance the officer traveled before overtaking : A police car parked in a 45 mi/h speed zone observes a passing car traveling at a slow, constant speed. The officer believes the driver is intoxicated and begins accelerating uniformly to 50 mi/h in 8 seconds and maintains a constant velocity of 60 m..

What will be the new height of fluid column : A u-tube manometer is used to measure the pressure of a vessel under vacuum. Assume the manometer is open to atmospheric pressure (101.325 kPa) and the density of the fluid in the manometer is 12.0 g/cm3.

Find the surface water elevation of reservoir c : Three reservoirs - connected by a branching cast-iron pipe system. If the pipe lengths ar L1 = 3000ft, L2 = 2200, and L3 = 1600 ft the respective pipe diameters are 15,10, and 18in, and the surface water elevations of two of the three reservoirs are ..

What is the steady-state concentration of salt in the tank : Determine A_x and A_y, joint A's reaction forces' magnitudes in the x and y directions, respectively, and C_y, joint C's reaction force's magnitude in the y direction.

User Account

All Pages