Work required to perform this operation on an ideal gas

Assignment Help Mechanical Engineering

Reference no: EM13703093

Ten moles of ethylene (T_c=9.2 degrees C, P_c= 214.2kg/m^3) are to be compressed isothermally from their initial state (P = 21.7 bar,T = 25 ºC, and V = 1000 cm3/mol) to 100 cm3/mol.

a. Estimate the work required to perform this operation on an ideal gas.

b. Estimate the work required to compress a mixture of ethylene and nitrogen (y_ethylene=0.3) to the final state using the van der waals equation of state.

Reference no: EM13703093

Questions Cloud

Examine the major benefits for an organization to use ssds : Examine the major benefits for an organization to use SSDs and analyze the major disadvantages and possible hazards that an organization should consider before adopting SSDs.

Calculate the reservoir pressure of the tunnel : Consider a flat plate mounted in the test section of a supersonic wind tunnel – assume the nozzle is perfectly expanded. The plate is at an angle of attack of -10° and the static pressure on the bottom surface of the plate is 1.0 atm. The nozzle thro..

What is the exact significance level : Is the F-value for Levene's Test for Equality of Variances significant? What is the exact significance level? if the Levene's Test for Equality of Variances is significant, then equal variances cannot be assumed.

Determine the rate of heat rejection to the environment : A refrigerator uses a R-134a as the working fluid and operates on an ideal vapor-compression refrigeration cycle between 0.12 and 0.7 MPa. The mass flow rate of the refrigerant is 0.05 kg/s.

Work required to perform this operation on an ideal gas : Ten moles of ethylene (T_c=9.2 degrees C, P_c= 214.2kg/m^3) are to be compressed isothermally from their initial state (P = 21.7 bar,T = 25 ºC, and V = 1000 cm3/mol) to 100 cm3/mol. Estimate the work required to perform this operation on an ideal gas..

Determine the entropy change of the steam : A rigid tank contains 8 kg of saturated vapor steam at 115 degrees c. The steam is cooled to the ambient temperature of 20 degrees c. (a) Sketch the process with respect to the saturation lines on a T-v diagram. (b) Determine the entropy change of th..

Maximum energy of distortion theory of failure : A steel circular bar (\sigmayp =250 MPa) of d=60-mm diameter is acted upon by combined moments M and axial compressive loads P at its ends. Taking M=1.5KN.m, determine, based on the maximum energy of distortion theory of failure, the largest allowabl..

Find the temperature distribution-throughout the chip : A computer chip has dimensions 3 × 3 × 0.2 and a volumetric heat generation rate of 2.5 × 107/3. The bottom and side surfaces of the chip experience no heat loss, whereas the top surface is cooled by air convection, with = 310?? and = 300 /2 x . Find..

Calculate the work of the expanding gas : An electric motor is connected to a 12-V battery. The electric current to the motor is 3 A. 90 % of the electric energy from the battery is converted into mechanical work to mix an ideal gas in an adiabatic cylinder.

User Account

All Pages