Will a buffer amplifier be needed on the dib

Assignment Help Electrical Engineering
Reference no: EM131386990

A DUT output signal under test contains frequencies from DC to 44 kHz. The DUT output impedance is guaranteed to fall between 50 and 100 Ω (purely resistive). We wish to measure the signal using a digitizer having a distributed cable capacitance of 120 pF plus a lumped input capacitance of 5 pF. Can this signal node be measured directly, or will a buffer amplifier be needed on the DIB?

Reference no: EM131386990

Questions Cloud

Calculate the parasitic resistance of a 13-in. pcb trace : What will be the differential voltage between the high-force and low-force output of the voltage regulator, measured at the regulator side of the PCB traces?
Describe the company and its product and the ethical dilemma : Briefly describe the company and its product and the ethical dilemma associated with production and distribution of its products. Examine how the perception of the product differs within cultures-both within the United States and globally.
Discuss the advantages of a person-focused approach : Although no large-scale studies have clearly demonstrated the benefits of the person-focused pay programs, case studies suggest that employees and companies enjoy advantages from person-focused pay programs.In this assignment, you will review and ..
What is the distributed capacitance of this coaxial cable : What is the distributed capacitance of this coaxial cable? What is the phase shift, in degrees, between the DUT output and the digitizer input? (Your answer may exceed 360 degrees.)
Will a buffer amplifier be needed on the dib : We wish to measure the signal using a digitizer having a distributed cable capacitance of 120 pF plus a lumped input capacitance of 5 pF. Can this signal node be measured directly, or will a buffer amplifier be needed on the DIB?
Discuss the components of leaves-of-absence : Discuss the components and purpose of types of leaves-of-absence, including FMLA, military, personal, and sabbaticals. If the leave type is mandated by law, discuss the employer responsibilities and benefits to the employee.
Is jane jones stop payment order effective : On Wednesday, December 28, the payor bank makes payment of the check final. Is Jane Jones' stop payment order effective against the payor bank? Explain.
Discuss about the post given below : Managers share responsibility for employee performance and have an active role to play in the performance management cycle. Terminology that is often used to describe the actions of a manager in the performance management cycle include coaching, c..
Calculate the length and position for the open stub line : Calculate the length and position for the open stub line matching of 50Ω with a load of 45 + j75 . What is the demoralized input admittance of the open-circuit stub line?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine the reaction heat of an ammonia decomposition

By minimizing Gibbs energy, determine the equilibrium concentration of the ammonia decomposition reaction for pressures of 0.1 bar, 1 bar, 10 bar, and 100 bar and temperatures in the range of 40°C to 1,000°C.

  Calculate the developed torque of the motor

A six-pole, 60Hz synchronous motor is connected to an infinite bus of 15 kV through a transmission line.

  Calculate the equilibrium density of vacancies

A) Calculate the Equilibrium density of Vacancies in a Si (Silicon) lattice at room temperature and at 200C lattice constantfor Si is 5.43A.

  What is initial speed of electron if it stop just at surface

Two charged, parallel, flat conducting surfaces are spaced d = 2.10 cm apart and produce a potential difference ΔV = 500 V between them. An electron is projected from one surface directly toward the second.

  What is the probability that all bits are 0s

In a test of a printed circuit board using a random test pattern, an array of 10 bits is equally likely to be 0 or 1. Assume the bits are independent. (a) What is the probability that all bits are 1s (b) What is the probability that all bits are 0s

  Calculate the voltage drop across the bulb

An electrical energy source forces a constant current of 500(mA) through a light bulb for one hour. If 12.6(kJ) is given off in the form of light and heat energy, calculate the voltage drop across the bulb.Use Engineering Notation with 3 decimal p..

  Find the energy in ev of the emitted electrons from surface

The photoelectric threshold wavelength for Tungsten is 2300 Å. Find the energy in eV of the emitted electrons from the surface by ultraviolet light of wavelength 1800 Å.

  Compute the flow rate of the turbine. ignore penstock losses

The reservoir is cylindrical with 200m radius. Just before midnight, the depth of water in the reservoir is 10m and the water head is 100m. To store 100MWh, compute the flow rate of the turbine. Ignore penstock losses.

  Determine what is the real signal to noise ratio

The signal noise ratio in an FM system is 4:1 The maximum allowed deviation is 4 KHz. How much frequency deviation is introduced by the phase shift caused by the noise when the modulating frequency is 650 Hz

  What must be done to interface ttl to cmos

A pull-up resistor must be used between the TTL output-CMOS input node and Vcc; the value of RP will depend on the number of CMOS gates connected to the node.

  Develop a verilog model for a peak detector

Develop a Verilog model for a peak detector that finds the maximum value in a sequence of 10-bit unsigned integers.

  Find the voltage v1 and the current through each inductor

Find the voltage V1 and the current through each inductor in the circuit of given figure.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd