Which truck will cause more pavement damage

Reference no: EM13210340

truck A has a single axles. one axle weights 12,000 lb and the other weights 23,000 lb. truck b has 8000 lb single axle and a 43, 000 lb tandem axle. on a flexible pavement with a 3 inch hot mix asphalt (HMA) wearing surface, a 6 inch soil cement base and an 8 inch crushed stone subbase, which truck will cause more pavement damage?(assume drainage coefficients are 1.0)

Reference no: EM13210340

Questions Cloud

Explain nitrogen and oxygen do not react appreciably : Nitrogen and oxygen do not react appreciably at room temperature, as illustrated by our atmosphere. But at high temperatures, the reaction below can proceed to a measurable extent.

Use activity coefficients estimated from ionic strength : The total dissolved inorganic carbon (TIC) of a sample of groundwater is 8.33 mM. The temperature of the aquifer is 15C, the pH is 7.5, and the ionic strength is 0.05 M. What is the H2CO3, HCO3-, CO3 2-, and the partial pressure of CO2? [Use activ..

What percentage of subway riders must re-swipe the card : Passengers using New York's MetroCard system must swipe the card at a rate between 10 and 40 inches per second, or else the card must be re-swiped through the card reader. Research shows that actual swipe rates by subway riders.

Explain the enzyme would be less active : An allosteric enzyme that follws the concerted mechanism (MWC model) has T/R ratio of 300 in the absence of substrate. Suppose that a mutation reversed the ratio.

Which truck will cause more pavement damage : a 6 inch soil cement base and an 8 inch crushed stone subbase, which truck will cause more pavement damage?(assume drainage coefficients are 1.0)

Explain what is the equilibrium concentration of fluorine : What is the equilibrium concentration of fluorine if the initial concentrations of bromine and fluorine were 0.111 moles/liter in a sealed container and no product was present initially?

Find the gauge pressure at a second point in the line : At one point in a pipeline, the water's speed is 3.00 m/s and the gauge pressure is 4.00×10^4 Pa. Find the gauge pressure at a second point in the line 11.0 m lower than the first if the pipe diameter at the second point is twice that at the first..

Determine the torsional buckling stress : determine the torsional buckling stress for the compression member if the length is 4m and cross section is the form shown. the ends are restrained such that there are not free to warp.given A:5646mm2 Ix:42.63Mmm4 Iy:14067Mmm4 E:210kN/mm2 G:80kN/m..

Explain treatment of x with ag : Treatment of X with Ag(NH3)2 (silver diamine complex), yields a solid Z. When X is treated with H2O/H2SO4, an optically active product W, C7H14O, is formed. Draw the structures of X, Y, Z, and W.

User Account

All Pages