Which laws of thermodynamics are violated

Reference no: EM13561423

An inventor claims that an engine produces 120 kw with a fuel consumption of 20 kg/h. The energy content of the fuel is 36,00 kJ/kg. The energy is received at a mean temperature of 500C and rejected at a mean temo of 50 C. Which laws of thermodynamics are violated?

A) First law only

B) Second law only

C)First and second laws

D)Neither first nor second laws

Reference no: EM13561423

Questions Cloud

Determine maximum shearig stress in the shaft : A hollow steel shaft with an outside diameter of 400 mm and inside diameter of 300mm is subjected to the torque of 300 Kn. The modulus of rigidity for the steel is 80 GPa. determine

Look at the required volume of clearwell needed : A small city is evaluating disinfection requirements for their drinking water plant. With an average flow of 5 MGD and a peak flow of 9 MGD, determine the controlling CT factor (virus or giardia

Complexity of family relationships : Describe how in which story (stories) are the differences of cultural practices regarding women in the US and the Dominican Republic highlighted and in what ways?

What is the maximum load that diameter steel cable can hold : What is the maximum load that a .75" diameter steel cable can hold if the UTS of the steel is 145,000 PSI and a safety factor of 1.5 is required?

Which laws of thermodynamics are violated : An inventor claims that an engine produces 120 kw with a fuel consumption of 20 kg/h. The energy content of the fuel is 36,00 kJ/kg. The energy is received at a mean temperature of 500C and rejected at a mean temo of 50 C. Which laws of thermodynamic..

Purchasers of the enclosed substance : Purchasers of the enclosed substance should carefully and thoroughly follow the instructions provided herein for the use of the substance

Which one of the following would have the greatest impact : A spread footing supported on a sandy soil has been designed to support a certain column load with a factor of safety of 2.5 against bearing capacity failure. However, there is some uncertainty in both: the column load, P, and the friction angle, ?

Determine the minimum footing length l : etermine the minimum footing length L, and the placement of the columns on the footing that will place the resultant load at the centroid of the footing. The footing must extend at least 500 mm beyond the edges of columns A and C.

Purchasers of the enclosed substance : Purchasers of the enclosed substance should carefully and thoroughly follow the instructions provided herein for the use of the substance

User Account

All Pages