Which is not always possible within fcc guidelines

Assignment Help Electrical Engineering
Reference no: EM13226332

Transmitting data at higher speeds generally requires a wider bandwidth, which is not always possible within FCC guidelines. In addition to the wider bandwidth, higher speed transmission also requires a higher transmit power. Why? (Hint: this is actually a receiver constraint)?

Reference no: EM13226332

Questions Cloud

How the signals were changed to a power level : A typical method of measuring the linearity of an amplifier is called the "Two-tone" test. Signals at f1 and f2 are input to the amplifier and the output spectrum is observed. Assuming that signals at 14.1 and 14.2 MHz are input to an amplifier.
Explain the fundamentals of planning : Explain the Fundamentals of Planning and give an example of the goal of a front-line manager if the goal of the top managers is to educate customers on the features of the product?
State an expression for the acid ionization constant ka : classify each of the following acids as strong or weak. If the acid is weak, write an expression for the acid ionization constant (Ka).
Disadvantages of comparative effectiveness research : What are the advantages and the disadvantages of comparative effectiveness research (CER)? Should the U.S. implement a CE effort?
Which is not always possible within fcc guidelines : Transmitting data at higher speeds generally requires a wider bandwidth, which is not always possible within FCC guidelines. In addition to the wider bandwidth, higher speed transmission also requires a higher transmit power. Why
Explain acid or a base according to the arrhenius definition : Identify each of the following as an acid or base and write a chemical equation showing how it is an acid or a base according to the Arrhenius definition?
Explain why corporate management has become increasingly : Explain why corporate management has become increasingly sensitive to the creation of value for businesses/firms. What would be the result if value is not created?
What is a relative addressing mode : Discuss different types of addressing modes of HCS12. What is a relative addressing mode What is the difference between a direct and an extended addressing mode Discuss how Registers X and Y are used in index addressing mode.
Which has been highly successful inthe passenger tire market : A major producer of passenger tires has launched an advertisingcampaign in which it is trying to market windshield wipers to thepublic under its brand name, which has been highly successful inthe passenger tire market.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Design a differential pair amplifier with a gain

Submit an excel spreadsheet with your characterization results, and a screen shot of you amplifier schematics, and your simulation result running a sin wave (Use a vsin for input).

  Identifying the cultural and social factors

Identify one emerging technology, and evaluate its future prospects by identifying the cultural and social factors that may prevent or promote its successful application. Use concrete details to support your answer.

  Find the expression of the allowed energy levels

Using the time independent one dimensional Schrodinger equation, find the expression of the allowed energy levels for an electron in infinite potential well of width Δz= L (i.e. solve the differential equation and apply B.C. to obtain En)

  What fractional power does the wave have compared

A wave propagates 50m through a dielectric of region 1. Region 1 is lossy. Here, f= 0.6 Np/m. At an interface to region 2, the reflection coefficient is r =0.2+j0.5. The wave then propagates 50m back into region 1 from where it originated.

  What is the conversion efficiency of an amplifier

What is the conversion efficiency of an amplifier in which the effective value of the current through a 2.2-k? load is 5 mA and the drain on the 18-V dc supply is 3.8 mA

  Explain received power of half-wave dipole antennas

Received power of half-wave dipole antennas, Assume that two antennas are half-wave dipoles and each has a directive gain of 3dB. If the transmitted power is 1W and the two antennas are separated by a distance of 10 km, what is the received power?

  What should be the filter''s passband cut-off frequency

What should be the filter's passband cut-off frequency?(DSP Question).

  Design an interface for geared dc motor

Design an interface for a ±24 V, 500 mA geared DC motor. The time constant of the motor is 10 ms. Include software to adjust the delivered power from 0 to 100%.

  Find the minimum sampling frequency of the a-d converter

our senior design team is designing a force sensor to measure a force signal and analyze the signal with a microcomputer (binary system). The analog force signal is between 10 N and 70 N and has the frequency bandwidth of DC - 1000 Hz.

  Determine the value of r2 in ohms

Two resistances R1 and R2 are connected in series. We know that R1=60 ohms and that the voltage across R2 is three times the value of the voltage across R1. Determine the value of R2.

  What are the prospects for offshore oil beds

Research about origin, formation process, and age of oil. What type of biota contributed to oil formation How is that linked to marine environment being conducive to oil formation What are the prospects for offshore oil beds

  What is the maximum allowable resistor size

Design a DC current source to meet the following specifications: - Current source value: 100 u-amps +/- 1% (over all possible load and supply voltage conditions). - Output resistance: >20 Mohms. - Available DC voltage sources are bipolar and range fr..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd