Which is cooled just a fraction of a degree in the exchanger

Assignment Help Civil Engineering
Reference no: EM13306007

A barge-mounted, ocean thermal energy conversion (OTEC) power station is being tested off the island of Hawaii. The 50 kWturbogenerator runs on a closed ammonia cycle. This uses the temperature difference between warm surface water (27oC), which is cooled just a fraction of a degree in the exchanger, and cold bottom water, which is heated from 6oC to 7oC on the exchanger surface. If the operation is only 10% as effective as a Carnot cycle between these temperatures (that is, between 6-7oC and 27oC), find the needed pumping rate of cold water up from the ocean bottom.

Reference no: EM13306007

Questions Cloud

Find the tension in the cord when the radius is given : The ball is kicked so that it has a velocity of 0.5 m/s and the cord is pulled in at a rate of 0.2 m/s. Neglect friction so that the only important force on the ball is the tension in the cord. Find the tension in the cord when the radius is 0.25 ..
What is the value of x when block comes to rest momentarily : The block is released from rest when the spring is unstretched (at x=0). We wish to show that the ensuing motion of the block is simple harmonic. Call the initial configuration of the system that existing just as the block is released from rest.
How far will a depleted uranium 30 mm round penetrate : How many centimeters of armor plating will a 150 gram 30 mm round penetrate. How far will a depleted uranium 30 mm round penetrate if its mass is 600 grams.
Estimate effective coefficient of friction between runways : A truck is designed to measure concrete roughness. During a typical test the driver will bring the vehicle to a constant test velocity, v, and then suddenly lock the brakes bringing the vehicle to a complete stop.
Which is cooled just a fraction of a degree in the exchanger : A barge-mounted, ocean thermal energy conversion (OTEC) power station is being tested off the island of Hawaii. The 50 kWturbogenerator runs on a closed ammonia cycle.
Calculate the transverse speed of the element : A transverse wave on a string is described by the wave function y = A0sin(kx + ωt) where A0 = 0.425m, k = 0.895rad/m, Calculate the transverse speed of the element
What are the different sources of short term financing : What are the different sources of short term financing? What are the characteristics of each source and why might a company chooseone over the other?
How many dollars worth of sales are generated : A firm has net working capital of $2,715, net fixed assets of$22,407, sales of $31,350, and current liabilities of $3,908. How many dollars worth of sales are generated from every $1 in total assets?
What is the maximum cop for this pump if heat is extracted : Consider a house that is heated and maintained at 20oC by a heat pump during the winter. What is the maximum COP for this pump if heat is extracted from the outdoor air at (a) 10oC, (b) -5oC, and (c) -30oC

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine how many bolt and hole have to be recycled

You are going to assemble 1,000 bolt + hole combinations. The bolts have a mean diameter of 1.000 cm, normally distributed with standard deviation of 0.010 cm. The holes have a mean diameter of 1.030 cm, normally distributed with standard deviatio..

  Sulphate ions in natural and industrial environments

List some of the common sources of sulphate ions in natural and industrial environments. For a given sulfate concentration, explain which of the following solutions would be the most deleterious and which would be the least deleterious to a permea..

  How much was the initial investment at an interest rate

A company that manufactures regenerative thermal oxidizers made an investment 10 years ago that is now worth $1,300,000. How much was the initial investment at an interest rate of 15% per year (a) simple interest and (b) compound interest?

  Determine the location of the deepest point of the curve

The elevation of the curve at its deepest point must be at elevation 168.00 feet or higher to clear a major pipe installation. If the PVC is at station 0+00 with an elevation of 176.20 feet, determine the location of the deepest point of the curve..

  Dry unit weight of material

A soil borrow material in its natural state in the ground has a unit weight of 118pcf. Its natural water content is 7%. What is the dry unit weight of this material?

  Find what is the minimum distance from the stalled car

The road is in good condition and is initially dry, but it becomes wet 160 ft before the stalled car (and stays wet until the car is reached). What is the minimum distance from the stalled car at which the driver could apply the brakes and still s..

  Determine what would be the flow rate in gpm

Suppose that a water treatment plant has a Parshall Flume with a 4 ft wide throat. a) If the upstream depth of the water (ha) is 1 ft and the depth of the water in the throat section (hb) is 0.65 ft, what is the flow rate in gpm

  Determine what is the outlet air temperature

A total of 13,610 kg/h of air at 1 atm abs pressure and 15.6C is to be heated by passing over a bank of tubes in which steam at 100C is condensing. The tubes are 12.7mm OD, 0.61 m long, and arranged in-line in a square pattern with Sp=Sn= 19.05mm.

  Determine an appropriate plywood thickness and span rating

For a total floor load of 75 psf on 2x floor framing at 24 o.c., determine an appropriate plywood thickness and span rating assuming panels with edge support and panels oriented perpendicular to the framing. Specify the minimum fasterners and spac..

  Hydraulic radius of the river

In that season, what are the hydraulic radius of the river, its mean velocity and volumetric discharge?

  What is the coefficient of rolling resistance on the road

A bicyclist is riding a bicycle on a flat road. The combined mass of the bicyclist and bicycle is = 110kg, the radius of each wheel is = 32.5cm, and the coefficient of rolling resistance between the tires and the road is = 0.245 cm.

  Determine the depth of flow in the channel y2

Water flows down a spillway at the rate q = 15 m^3/s into a horizontal channel where v1 = 20 m/s. Determine the depth of flow in the channel y2 that will casue the hydraulic jump to occur in the channel. Determine the headloss hL in the jump.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd