Which cross section option will provide the highest flow

Assignment Help Civil Engineering
Reference no: EM13560454

Two channel cross sections are proposed. Assume slope, cross sectional area, and surface type are constant for each channel. Which cross section option will provide the highest flow rate? Show calculations.

1. Rectangular cross section: Width=2*Depth

2. Square cross section

Reference no: EM13560454

Questions Cloud

How efficient is the pump : A fireboat pump draws seawater (density=1.95 slugs/ft^3) from a 6 inch diamter submergred pipe that reaches 6 feet under the free surface and discharges 120 ft/s through a 2 inch diamter nozzle 10 feet above the free surface
Find the rate of biological growth : Two identical complete-mix activated sludge units are connected in series; one-half of the sludge recycle flow rate, QR, is recycled to the primary effluent pipeline which handles a flow rate Q, and the other half is recycled to the effluent line fro..
Which alloy and in what condition whould you choose : For a concrete column that is part of a braced frame, if the column is square, tied, 18 inches per side, 16 feet long, classify the column as slender or non slender
For a concrete column that is part of a braced frame : For a concrete column that is part of a braced frame, if the column is square, tied, 18 inches per side, 16 feet long, classify the column as slender or non slender. Assume that at one end of the column a clockwise moment of 100 k-ft is present
Which cross section option will provide the highest flow : Two channel cross sections are proposed. Assume slope, cross sectional area, and surface type are constant for each channel. Which cross section option will provide the highest flow rate? Show calculations.
What is the major head loss in a coarse concrete pipe with : What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm
What is the major head loss in a coarse concrete pipe with : What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm
Classify the column as slender or non slender : For a concrete column that is part of a braced frame, if the column is square, tied, 18 inches per side, 16 feet long, classify the column as slender or non slender
Calculate the hydraulic loading and the organic loading : A two-stage trickling filter plant treats 291.7 m3/h of municipal wastewater that has a BOD5 of 200 mg/L. The two filters have equal dimensions (depth = 1.68 m; diameter = 21.3 m), and each has a recycle ratio of 1.0. If the primary clarifier removes..

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the concentration of bod in the jackson river before

The James Rives flows in from the East at 320 m^3/min and joins the Jackson River flowing at 605 m^3/min just outside the town of Charlotte, NC. The concentration of BOD in the James River is 14 mg/L

  What is the volume of the lake in cubic feet

A shallow lake can be considered a CFSTR. Nitrification, the conversion of ammonia to nitrate (NH3 -> NO3-) occurs in the lake according to first – order kinetics. One stream feeds the lake and one stream empties the lake with the flow rate in both b..

  What is the major advantage of a dual-media coal-sand filter

What is the major advantage of a dual-media coal-sand filter compared with aconventional sand filter?

  Compare the crystalline state in metals and polymers

(a) Compare the crystalline state in metals and polymers. (b) Compare the noncrystalline state as it applies to polymers and ceramic glasses

  Determine the magnitude and direction of the resultant

Part of the roof of a sports stadium is to be supported by the cables AB and AC. The forces the cables exert on the pylon A to which they are attached are represented by the vectors FAB and FAC.

  What is appropriate pressure at the point of max stenotic

Blood is flowing through an aorta of 1.0 cm diameter at an average velocity of 50 cm/s. The mean pressure is 100 mm Hg, The blood enters a stenosis where the aortic diameter is 0.5 cm. What is the appropriate pressure at the point of maximum steno..

  Figure out the times henry was at each of the companies

Figure out the times he was at each of these companies, who else was there at the time and how they might have collaborated. Include the technologies that were in use or being developed.

  Estimate contact time to achieve an effluent concentration

Estimate the contact time to achieve an effluent concentration of 200 fecal coliforms/100 mL using a Cl2 dose of 3 mg/L if the wastewater temperature is 28 oC. Assume the activation energy (Ea) at pH = 7.4 is 6,500 cal/mole.

  Determine the axial and hoop stresses at the lower end

Determine the axial and hoop stresses at the lower end of the vessel. A standpipe 12 ft in diameter and 50 ft tall is being con- structed for use as a storage tank for water with a specific weight of 62.4 lb/ft3. The wall thickness of the vessel is..

  What is the relationship between precipitation rate and then

For this landfill, what is the relationship between precipitation rate and then resulting rise in water level within the drainage layer? Display your analysis graphically, corresponding to a minimum of the five rainfall intensities of magnitude 1-5".

  Determine the discharge of a trapezoidal concrete channel

Determine the discharge of a trapezoidal concrete channel section with a bottom width of 4 ft and side slopes of 2:1. The depth of flow is 5 ft and the channel slope is 0.5%

  How to determine span of the subject beam which theoretical

Again assuming d=14in, determine, or at least show exactly how to determine, the portion (length) of span of the subject beam which theoretically would require no shear reinforcement.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd