Which base course aggregate has a target dry density

Assignment Help Civil Engineering
Reference no: EM13321120

Base course aggregate has a target dry density of 119.7 Ib/cu ft in place. It will be laid down and compacted in a rectangular street repair area of 2000 ft by 48 ft by 6 in. The aggregate in the stockpile contains 3.1 percent moisture. If the required compaction is 95% of the target, how many tons of aggregate will be needed?

Reference no: EM13321120

Questions Cloud

Determine the current amplitude : a 200 ohms resistor and a .4 H inductor are connected in series with a voltage source having amplitude of 30 v, what is the current amplitude
Describe the impact of culture on managerial decision-making : Describe the impact of culture on managerial decision-making.
Explain the square of the concentration of the halide : Although the mechanism of the coupling process is not well understood, it is known that ratre appears to depend on the square of the concentration of the halide.
Determine the settlements when a stress of 60 kpa : The soil properties are Cc = 0.4, Cr = 0.1 and fsat = 18 kN/m3 for both clays, and the water table is 1 m below the soil surface. Determine the settlements when a stress of 60 kPa is applied by the building.
Which base course aggregate has a target dry density : Base course aggregate has a target dry density of 119.7 Ib/cu ft in place. It will be laid down and compacted in a rectangular street repair area of 2000 ft by 48 ft by 6 in.
Explain the empirical formula of a compound composed : What is the empirical formula of a compound composed of 3.25% hydrogen, 19.36% Carbon, and 77.93% oxygen by mass
What is the power drawn from the electric outlet : An AC adapter for a telephone answering machine uses a transformer to reduce the line voltage of 120 V to a voltage of 7.00 V. What is the power drawn from the electric outlet
Explain balnace the half reactions in an acidic solution : Balnace the following half reactions in an acidic solution a) MnO4 -(aq)---- MnO2(s) b) IO2- (aq)----Io4-(aq) based on (a) and (b) above, write balanced redox eqautions of (A) in an acidic solution MnO4-(aq) + IO3_(aq)----MnO2(s) + IO4- (aq) (A)
What is max number of phases that may be present for ternary : For a ternary system, three components are present; temperature is also a variable. What is the maximum number of phases that may be present for a ternary system, assuming that pressure is held constant

Reviews

Write a Review

Civil Engineering Questions & Answers

  Make a list of threats which may be vulnerable to company

Make a list of threats which may be vulnerable to the company's information system.

  Determine what minimum value of coefficient of traction

A wheel tractor-scraper is operating on a level grade, assuming no power derating is required for equipment conditions, altitude, and temperature.

  Calculate the mass flux rate and the flow rate

Water is flowing in a 6-cm diameter pipe at 20 m/s at 10?C. If the pipe enlarges to a diameter of 12-cm, calculate the reduced velocity. Also, calculate the mass flux rate and the flow rate.

  Determine what percent of the hocl is dissociated

A solution of HOCl is prepared in water by adding 15 mg HOCl to a volumetric flask, and adding water to the 1.0 L mark. The final pH is measured to be 7.0. What are the concentrations of HOCl and OCl

  Find the steady-state concentration to be completely mixed

Suppose an air pollutant with rate constant k= 0.20/hr is emitted into the box at a total rate of 10.0 kg/s. Find the steady-state concentration if the air is assumed to be completely mixed.

  Calculate cc and use the aisc equations e2-1 and e2-2

If design is needed, use a W-built-up cross section; select the W section and the thickness of the plate. Calculate Cc and use the AISC equations E2-1 and E2-2 to determine the allowable stress for each axis and ultimately the allowable load for t..

  Calculate the maximum strain the copper alloy can sustain

a) calculate the operational compressive strain this copper specimen is subjected to. b) calculate the maximum strain this copper alloy can sustain without becoming plastically deformed.

  Determine the rate of superelevation on the c

A curved section of a two-lane highway measured in the field was found to be 22 feet wide and have an elevation difference of 1.37 feet between the outside and inside edges of the pavement

  Find the percentage volume less due to compaction

A soil deposit has a void ratio of 0.89, is the void ratio is reduced to 0.59 by compaction; find the percentage volume less due to compaction.

  Determine the angular velocity of pinion gear and velocity

The pinion gear rolls on the gear racks. If B is moving to the right at 8 ft/s and C is moving to the left at 4 ft/s, determine the angular velocity of the pinion gear and velocity of its center A.

  Determine the minimum horizontal force necessary for man

Determine the minimum horizontal force necessary for 200 lb man to scale crevice (using his feet and back). The coefficient of static friction between his shoes and his back against the wall is 0.4.

  Determine the valve loss coefficient needed for h

Determine the valve loss coefficient needed for h=20 ft. All losses except for the flow control valve are negligible. The area of the pipe is 5 times the area of the exit nozzle.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd