Whether the claimed performance of process is consistent

Assignment Help Chemical Engineering
Reference no: EM131172228

An inventor has devised a complicated non flow process in which 1 mol of air is the working fluid. The net effects of the process are claimed to be:

A change in state of the air from 523.15 K (250°C) and 3 bar to 353.15 K (80°C) and 1 bar.

The production of 1800 J of work

The transfer of an undisclosed amount of heat to a heat reservoir at 303.15 K (30°C)

Determine whether the claimed performance of the process is consistent with the second law. Assume that air is an ideal gas for which Cp = (7/2)R.

Reference no: EM131172228

Questions Cloud

How does the u.s. rank in terms of its physical inactivity : Which countries have problems with physical inactivity? How does the U.S. rank in terms of its physical inactivity?
What volumetric flow rate of fuel gas is required : Of the entering methane, 70% burns to carbon dioxide and 30% burns to carbon monoxide. What volumetric flow rate of fuel gas is required if there are no heat losses to the surroundings?
What temperature does the flue gas leave the furnace : If 800 GJ per kmol of fuel is transferred as heat to boiler tubes, at what temperature does the flue gas leave the furnace? Assume complete combustion of the fuel.
Evaluate the formal performance appraisal systems : 201630 HRM502 Additional Assessment Essay. Critically evaluate the proposition that formal performance appraisal systems should be abandoned by organizations
Whether the claimed performance of process is consistent : Determine whether the claimed performance of the process is consistent with the second law. Assume that air is an ideal gas for which Cp = (7/2)R.
Are isentropic processes necessarily reversible : Reversible adiabatic processes are isentropic. Are isentropic processes necessarily reversible and adiabatic? If so, explain why; if not, give an example illustrating the point.
What will happen in the gasoline market if oil prices rise : What will happen in the gasoline market if oil prices rise? What will happen in the cell phone market as technology improvements bring costs down? What will happen in the syrup market if honey prices rise?
Review the operational analysis done through the interview : In the design phase of Fabrics, Inc. Blanchard and Thacker (2013) only developed objectives for conflict resolution. Choose one of the other training requirements and develop three to four learning objectives. Critique the design component and ide..
What is the ratio of chilled air to warm air : Assuming adiabatic operation, what is the ratio of chilled air to warm air that the device produces? Assume that air is an ideal gas for which Cp = (7/2)R.

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Determine the apparent power and the reactive power

Determine the apparent power and the reactive power drawn by the load.

  Evaluate particle diameter at different gas velocities

Evaluate particle diameter at different terminal gas velocities

  Information processing steps involved in performing tasks

List as many items and give as many details as possible. Hints: Consider the problems of obstacle detection, information display, propulsion system, inertial guidance, route recall, power supply, etc.

  Lewis relation ship in air drying

A value of mass transfer coefficient kg = 0.0150 kg /m2-s . it was also found that the corresponding heat transfer co efficient = hc = 15 j /m2-s

  Explain introduced to a hazardous waste reactor

A waste with a concentration of 0.1 gram per liter is to be introduced to a hazardous waste reactor that is to achieve 90% destruction. A reactant

  What are the expected amounts and compositions of the liquid

Is it possible to recover 70% of the ethane in the vapor by a single-stage flash at other conditions without losing more than 5% of nC4 to the vapor? Obtain K-values fromFigure.

  Calculate masses of alcohol and ether produced

calculate masses of alcohol and ether produced, per 1000 kg of allyl chloride fed to the reactor.

  What component of this comes from combustion of octane

Select a passenger car and calculate the efficiency of the vehicle in converting chemical energy from combustion into kinetic energy.

  Determine the membrane area needed

Determine the membrane area needed. Given: Membrane properties and mass transfer information - Develop a process schematic

  What mass of nitrogen was produced

If the mole fraction of nitrogen (xNitrogen ) is 0.134 after the reaction is complete, If the mole fraction of nitrogen (xNitrogen ) is 0.134 after the reaction is complete, what mass of nitrogen was produced?

  Calculate the output torque

Calculate the output torque if the rotational loss at this slip is 400 W.

  Mek-water-tce percentages

For a feed rate 2000 kg/h of solution, composition 30% w/w MEK, determine the number of stages required to recover 95% of the dissolved MEK, using 700 kg/h TCE, with countercurrent flow. Tie-line data for the system MEK-water-TCE percentages w/w, ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd