When will they be able to see the full sign

Assignment Help Civil Engineering
Reference no: EM13562558

A roadway has a 4% grade intersecting a -7% grade at at station 18+50.00. The grades are connected by an 800 foot vertical curve. A sign is proposed to be installed at Station 15+00.00. The bottom of the sign is 7 feet above the roadway. For drivers heading from Station 40+00 to Station 10 + 00, when will they be able to see the full sign? Assume a driver’s eye is 3 feet above the surface of the roadway.

Reference no: EM13562558

Questions Cloud

What is the total preassure at the bottom of the glass : There is a glass filled with 20cm of water and on top alayer of 30cm of oil, that exactly weights 0.700Newton. What is the total preassure at the bottom of the glass
What volume of air went through in 24hrs : A hi-vol clean filter weighs 18g and the dirty filter wighs 18.6g. the initial and final air flows are 70 and 60 ft3/min.
What is the center of mass velocity at bottom of the incline : A solid cylinder of radius .35m is released from rest from aheight of 1.8m and rolls down the incline without slipping as shown.What is the center of mass velocity at the bottom of the incline
What is the emission rate of carbon tetrachloride from this : A dry cleaning establishment buys 500 gal of carbon tetrachloride every month. as a result of the dry cleaning operation, most of this is lost to the atmosphere and only 50 gal remain to be disposed of.
When will they be able to see the full sign : A roadway has a 4% grade intersecting a -7% grade at at station 18+50.00. The grades are connected by an 800 foot vertical curve. A sign is proposed to be installed at Station 15+00.00
Will the quantty of coarse aggregate increase : A concrete mix with a 3-inch slump, w/c ratio of 0.50, and sand with a fineness modulus of 2.4 contains 1700 lb/yd^3 of coarse aggregate. Compute the required weight of coarse aggregate per cubic yard.
How much would the satellite weigh on the surface : A satellite, mass=5850-kg, is in a circular orbit of 4.1x10^5mabove the surface of a planet, which has a radius of 4.15x10^6m. How much would the satellite weigh on the surface of the planet
Find the ph of this solution and compare it to the result : Assume that H2CO3* dissolves first without dissociating, achieving equilibrium with the atmosphere, and then the solution is closed to the atmosphere. H2CO3* then dissociates (neglect secondary dissociation). Find the pH of this solution and compare ..
What percentage increase will there be in the flow from : Suppose a family of four, living in a home with an area of 100x50ft connects its stormwater drain to the sewer. Assume that 1in of rain falls over 1 day

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine height and the velocity of the water downstream

The centres of the piers in a bridge are 8.0m apart. The piers are each 0.8m wide. Water flow under the bridge with an upstream depth and velocity of 4.0m and 4.0m/s respectively. The pier has a drag coefficient Cd = 1.5.

  Consider a house into which radon is emitted through cracks

consider a house into which radon is emitted through cracks in the basement. the total volume of the house is 650 m3

  How to formulate a set of constraints that will enforce

Given the binary variables x1,x2,x3,x4 and x5, formulate a set of constraints that will enforce x3,x4, and x5 to equal one if x1=1 and x2=0.

  What is the vertical shear stress distribution at each point

For a narrow horizontal rectangular beam of width b and depth h (cross section), determine a) what is the vertical shear stress distribution (tau)xy at each point y along the cross section,

  Determine the pressure difference between a and b

Fluids A and B ave specific gravities .75 and 1.00 respectively. If the mercury is used as manometer liquid determine the pressure difference between A and B

  Determine the specific gravity of the wood

If a sample of wood measuring 1.45" x 3.45" x 6" long has a green weight of 8.55 lb. Determine the specific gravity of this wood.

  What is the axial force in member hj

The frame shown is used to support high-tension wires. If W = 200 lb, b = 3 ft, a = 30°, what is the axial force in member HJ?

  Find the pressure required to fill container at both point

find the pressure required to fill the container when the height of the fluid is h = 0.75m at both point 1 (intake 1) and 2 (intake 2). Assume the air is at atmospheric pressure until the water level passes intake 2 (at h = 0.5m) and the air follo..

  Determine the rainfall excesses for successive periods

Assume a saturated hydraulic conductivity of 0.8 in./hr, a porosity of 0.62, an initial moisture content of 0.28, and an average capillary suction of 7.2 in. The depression storage is 0.5 in.

  Determine an optimal production schedule for the month

For each radio produced during months 1 and 2, a $10 variable cost is incurred; for each radio produced during month 3, a $12 variable cost is incurred. The inventory cost is $1.5 for each radio in stock at the end of a month.

  Determine what is the tensile stress in the rope

A person (mass of 80g) is lifted upward by a 2 cm diameter safety rope with constant velocity. What is the tensile stress in the rope

  Determine the lrfd nominal and adjusted design values

Problem: Determine the LRFD nominal and adjusted design values and adjusted design resistances for the following members and loading combinations. All members are Select Structural Southern Pine and are fully braced to prevent lateral torsional bucki..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd