Whate are the relative fractions of ferrite and cementite

Assignment Help Civil Engineering
Reference no: EM13306523

A Fe-.25 w/o Carbon alloy is sloly cooled to 700 degrees C.

What is the composition of the Ferrite(alfa) phase and what is the compositon of the cementite(Fe3C) phase?

Whate are the relative fractions of ferrite and cementite?

What are the relative fractions of the proeutectoid-alfa and pearlite constituents?

Reference no: EM13306523

Questions Cloud

How high can that person climb the ladder before the slip : A ladder is supported by a horizontal floor and a vertical wall. Is 15 feet long and weighs 50 lbs, with the weight concentrated at its midlength. The ladder supports a person weighing 180 lbs.
Determine the maximum force that acted on the shell : A boad initially stationary at water,fires a shell in i direction,The shell's air speed =822 m/s.The shell was in the gu8n for .16s, and the force exerted on the shell decrease linearly fromthe initial force to zero over the firing interval.
When will the mass first reach a turning point : The frequency of a mass attached to a spring is 4Hz. At time t = 0, the mass has an initial displacement of 0.200m, When will the mass first reach a turning point
How high would it go if there were no air resistance : A projectile of mass 0.702 kg is shot straight up with an initial speed of 16.1 m/s. How high would it go if there were no air resistance
Whate are the relative fractions of ferrite and cementite : A Fe-.25 w/o Carbon alloy is sloly cooled to 700 degrees C. What is the composition of the Ferrite(alfa) phase and what is the compositon of the cementite(Fe3C) phase. Whate are the relative fractions of ferrite and cementite
Obtain the value of the mass : A mass attached to a spring oscillates with an amplitude of 18.0 cm; the spring constant is k= 17.0N/m. Find the value of the mass
Interpreting basic statistical data : Two laboratory and two randomized field experiments tested a psychological intervention designed to improve students' scores on high-stakes exams and to increase our understanding of why pressure-filled exam situations undermine some students' per..
What is the atomic mass number of the unknown nucleus : An unknown nucleus has twice the volume of a nucleus with 62 nucleons. What is the atomic mass number of the unknown nucleus
What is the amplitude of the oscillating mass : A mass is attached to a spring of spring constant 60.0 N/m along a horizontal, frictionless surface. what is the amplitude of the oscillating mass

Reviews

Write a Review

Civil Engineering Questions & Answers

  Force that cause stress-free

The rigid bar abcd is supported by a pin at B and restrained by identical steel bars at C and D, each of area 250mm 2 . if the temperature is increased by 8 0 C, find out the force P that will cause the bar at c to be stress-free.

  Determine the head loss caused by the piers

A bridge has cylindrical piers 1 m in diameter and spaced 15 m apart. Downstream of the bridge where the flow disturbance from the piers is no longer present, the flow depth is 2.9 m and the mean velocity is 2.5 m/s.

  Determine the flow rate of water through the channel

The flow rate of water flowing in a 3m wide channel is to be measured with a sharp-crested triangular weir 0.5m above the channel bottom with a notch angle of 60°. If the flow depth upstream from the weir is 1.5m

  Calculate the peak financial requirement

given the following cost expenditures for small warehouse answer project calculate the peak financial requirement, average overdraft.

  Determine the lubricant film thickness of flat surface area

A body weighing 120 lb with a flat surface area of 2 ft^2 slides down a lubricated inclined plane making a 30 degree with the horizontal. For a viscosity of 0.002 lb*s/ft^2 and body speed of 3 ft/s, determine the lubricant film thickness.

  Compute how many grams of water must be added to soil

it has been calculated that the maximum density for the soil will be obtained when the water content reaches 21.5%. Compute how many grams of water must be added to each 1000g of soil( in its natural state) in order to increase the water content 2..

  Describe will water level rise-fall or stay the same

bathtub full of water with small tub floating in it with baby and rock in it. the baby throws rock into tub. will water level rise, fall, or stay the same

  How to use design chart for r for grade 60 reinforcement

Select the number and size of reinforcing bars required to resist a total factored moment of 180 ft. kips for a rectangular section with b = 12 in., d = 19.5 in., h = 24 in., f'c = 4 ksi, and fy = 60 ksi.

  What is break even point and when would be better to choose

A car dealership offers $2000 cash back; financing at 3.49% APR for 60 months or 0% APR for 60 months when you purchase a car. What is the break even point and when would it be better to choose one option over the other.

  Specify material for component assuming a safefty factor

a component in a packaging machine is subjected to a tensile load of 36.6 KN which will be repeated several times over the life of the machine. The cross-section of the component is 12 mm thick and 20 mm wide.

  Determine required diameter of each rod by the concrete

The column is constructed from high-strength concrete and four A-36 steel reinforcing rods. If it is subjected to an axial force of 37.5 kN , determine the required diameter of each rod so that one-fourth of the load is carried by the concrete

  Compute magnitude of the velocity and acceleration vectors

A Ferris wheel with a radius of 35 feet starts from rest and undergoes an angular acceleration of 0.05 rad/s^2. Compute the magnitude of the velocity and acceleration vectors at 5 seconds for a point on the rim of the Ferris wheel.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd