What would be the percentage change in field intensity

Assignment Help Electrical Engineering
Reference no: EM13276972

If the power of a 500-kHz transmitter is increased from 150 W to 300 W, what would be the percentage change in field intensity at a given distance from the transmitter? What would be the decibel change in field intensity?

Reference no: EM13276972

Questions Cloud

Find the optimal solution using pom : Formulate an LP that can be used to minimise the monthly costs of meeting demand. Find the optimal solution using POM/QM and state the outcomes.
Determine the distance from parabolic reflector of diameter : Determine the distance from a parabolic reflector of diameter D=10 m to the boundary of the far-field region. The antenna is being used to transmit a 4.1 GHz signal.
What is the amplitude of the current at that same instant : A charged capacitor is connected to an inductor. At time t=0 the charge on the capacitor is Q= 6uC. What is the amplitude of the current at that same instant
What is effective radiated power of television broadcast : What is the effective radiated power of a television broadcast station if the output of the transmitter is 1000 W, antenna transmission line loss is 50 W, and the antenna power gain is 3
What would be the percentage change in field intensity : If the power of a 500-kHz transmitter is increased from 150 W to 300 W, what would be the percentage change in field intensity at a given distance from the transmitter. What would be the decibel change in field intensity.
What is the magnitude of the force on the proton : A proton moving with a velocity of 4.0 *10^4 m/s enters a magnetic field of 0.20 T. what is the magnitude of the force on the proton
Determine what is the max charge in the interval : The total charge accumulated by a certain device is given by as a function of timeby q=18t2-2t4 ( in SI units). What is the max charge in the interval 0
What the preferred food types and price points : Develop a sampling plan to study the lunch habits of undergraduate and graduate students. Research questions involve who has the most market share and what the preferred food types and price points.
Determine the magnetic torque : A circular loop of wire of radius 0.50 m is in a uniform magnetic field of 0.30 T. The current in the loop is 2.0 A. What is the magnetic torque when the plane of the loop is perpendicular to the magnetic field

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate the unit step response of the dt system

Calculate the unit step response of the DT systems with the following impulse responses: a-) h[k]= u[k+6]- u[k-10] b-) h[k]= 3^k- u[-k]

  Use j-k flip flops for the moore machine of boolean equation

With the following Boolean equations sketch a Moore Machine J0= Q'0 and y J1= Q2 and y or Q0 and y' J2 = Q1 and Q0 and y' K0 = Q0 and y' K1 =Q'0 and y' or Q'2 and Q0 K2= Q2 and Q'0 Use J-k flip flops for the Moore Machine J and K represent the fli..

  Find the total real and reactive power delivered to load

A 345-kV, 3-phase transmission line delivers 100 MVA, 0.866 lagging, to a wye connected load. Calculate the following: a. The total real and reactive power delivered to the load. b. The real and reactive power per phase.

  Determine the volumes of each of the semiconductors

Determine the volumes of each of these semiconductors that will on avg contain one hole. The intrinsic carrier concentrations are ni=1.02*10^10 cm^-3,ni= 2.1*10^ cm^-3, and 10^-7 cm^-3.

  What is the rate of change of the voltage on the capacitor

The switch in a RC circuit is closed. If the resistance is 134462ohms, the capacitance 7.5 microF, and the applied voltage 18 volts, what is the (average) rate of change of the voltage on the capacitor, to the nearest tenth of a V/s, during the fi..

  What is the number of uniform quantization levels needed

A signal is quantized using PCM. The maximum signal to quantization noise ratio is 20dB. What is the number of uniform quantization levels needed

  What is the indicated temperature at the times

A temperature sensor has a static transfer function of 0.15mV/C and a time constant of 3.3s. If a step change of 22 degrees to 50 degrees C is applied at t=0, find the output voltages at .5s, 2.0s, 3.3s, and 9s. What is the indicated temperature a..

  Show the expression for the voltage across r2 in the circuit

Given the following voltage and current expressions, show the expression for the voltage across R2 in the circuit Note, R1=100 ohm, R2=300 ohm, and R3=200 ohm: a) v(t) = 10 cos (377t + pi/4) V b) i(t) = 5 cos (754t - pi/3) mA

  Give the algebraic formula for j and k inputs of flip-flops

Design a circuit using JK flip-flops that takes in a binary stream B0B1B2B3 and outputs 1 at a time t if the stream recieved thusfar (i.e. BoB1..Bt-1Bt), when read as an unsigned binary number, is divisible by 3.

  Sketch the equivalent circuit of the two-stage amplifier

Two identical CS amplifiers are connected is cascade. First stage is fed with a source Vsig having a resistance Rsig = 100k Ohm. A load resistance Rl = 10k Ohm is connected to the drain of the second stage.

  Calculate the starting torque of the motor

A dc series motor has a armature current of 10A at full load. The motor terminal voltage is 300V. The armature and field resistances are 2 ohm and 3 ohm respecitively. The motor speed at full load is 250 rpm. Calculate the starting torque of the m..

  Electrical and instrumentation use

Electrical & Instrumentation Use, State typical values for the loading effect on a low voltage AC circuit containing a lamp when measuring current with

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd