What will be the total vehicle delay

Assignment Help Civil Engineering
Reference no: EM13210623

Vehicles begin to arrive at a toll booth at 850 am with an arrival rate of x(t) = 4.1 + .01t (with t in min and x(t) in veh /min.) The toll booth opens at 9am and processes vehicles at a rate of 12 per minute throughout the day. Assuming D/D/1 queuing, what will be the total vehicle delay?

Reference no: EM13210623

Questions Cloud

Impulse response function : An increase in TFP leads to an outwards shift in labor demand (recall this from our firm analysis unit), which, as long as the upward-sloping labor supply function does not shift, leads to an increase in the real wage.
What is the average length of queue : Vehicles arrive at a toll booth with a mean arrival rate of 2 veh/min (the time between arrivals is exponentially distributed). The toll booth operator processes vehicles (collects tolls) at a uniform deterministic rate of one every 20 seconds. Wh..
Excess of methylmagnesium bromide producing methane gas : It only contains only C,H, and O. A 116mg sample was treated with an excess of methylmagnesium bromide, producing 48.7ml of methane gas at 20 degrees C and 750mm Hg.
What types of attacks can still occur : Do the administrators of server systems still have to be concerned about, and take further countermeasures against DoS attacks, if so, what types of attacks can still occur, and what measures can be taken to reduce their impact?
What will be the total vehicle delay : Assuming D/D/1 queuing, what will be the total vehicle delay?
What is the probability that the vehicle pulling out : what is the probability that the vehicle pulling out will get in an accident with oncoming traffic?
What type of exercise takes place in a classroom : What type of exercise takes place in a classroom setting arranged to look like an emergency operations center or in an actual emergency operations center, and involves simulation using written, telephone, and radio messaging.
When will the queue clear : where u(t) is in vehicles per minute and t is in minutes. When will the queue clear?
Explain whats the anode charge : whats the anode charge. please include the answer and why and a step process please

Reviews

Write a Review

Civil Engineering Questions & Answers

  Elastic modulus of steel

Given: elastic modulus of steel is 200 GPa, yield and ultimate tensile strength of steel are 600 and 750 MPa, respectively.

  Annual power cost of the ro system

Is the system within membrane manufacturer's warranty requirement of maximum flux rate of 14 gfd? What is the annual power cost of the RO system?

  Problem related to horizontal cylindrical tank

A horizontal cylindrical tank 4 ft in diameter and 10 ft long is full of water. Find the work done in pumping the water to a point 4 above the top of the tank.

  What the meaning of steady state

could you please help me to figure out what the meaning of steady state in the pavement management system preservation and rehabilitation.

  What is effect of packing factor in self compacting concrete

what is effect of packing factor in self compacting concrete?

  Personalized Cancer Therapy-A step forward

Cancer is the uncontrolled growth of abnormal cells in the body resulting in tumours that can be benign or malignant (cancerous cells). A proper treatment is necessary to fight with this serious disease.

  Presedimentation-uspended solids concentration of raw revers

Presedimentation can reduce the suspended solids concentration of raw river water from 500 mg/L to 200 mg/L. How many pounds of dry solids does this represent per million gallons?

  Consolidated-drained triaxial shear test

A consolidated-drained triaxial shear test on a normally consolidated clay yielded a drained friction angle of 28 degrees. If the confining pressure during the test was 15 psi, what was the major principal stress at failure.

  Four-lane freeway problem

A four-lane freeway (two lanes in each direction) is on mountainous terrain with 11-ft lanes, a 5-ft right-side shoulder, interchange spacing of one every 10 miles, and a 60-mi/h base free-flow speed.

  Determining the velocity of motor having constant power

A constant power of 1.5 hp is supplied to the motor while it operates with an efficiency of ε = 0.8. Determine the velocity of the 200-lb crate in 15 seconds, starting from rest. Neglect friction.

  Define what are the quantitative measures of reliability

What are the quantitative measures of reliability (discuss measures for hardware, software, personnel, facilities, and data)?

  Darcy law and quantity of groundwater

Using Darcy's Law, calculate the quantity of groundwater (L/day), the seepage velocity (m/s), and the contaminant loading (Kg/day) to the river (assuming no retardation) for the following scenario. Be sure to include both a plane view and cross-se..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd