What will be the speed if the load torque is increased by 44

Assignment Help Electrical Engineering
Reference no: EM13248262

A 220V dc series motor runs at 700 rev/min when operating at its full-load current of 20A. The motor resistance is 0.5W and the magnetic circuit may be assumed unsaturated. What will be the speed if: (i) the load torque is increased by 44%, (ii) the motor current is 10A?

Reference no: EM13248262

Questions Cloud

How much work did in halving the distance between plates : A parallel-plate capacitor is charged to a potential V0, charge Q0 and then disconnected from the battery. The separation of the plates is then halved. What happens to (a) the charge on the plates
What are the conection between business and law : what are the conection between business and law from the standpoint of our economic system which is capitalized?
Calculate lost torque-opper loss and efficiency : A 100V dc series motor has an armature resistance of 0.2 ohm and field resistance of 0.25 ohm. The motor runs at a speed of 600 rev/min when the shaft torque is 27.14 Nm. Friction and windage losses at this speed are 300W.
Determine the total core and mechanical losses : A 230V shunt motor having an armature resistance of 0.05 W and a field resistance of 75 W draws a line current of 7 A while running light at 1120 rev/min. The line current at a given load is 46 A.
What will be the speed if the load torque is increased by 44 : A 220V dc series motor runs at 700 rev/min when operating at its full-load current of 20A. The motor resistance is 0.5W and the magnetic circuit may be assumed unsaturated. What will be the speed if: (i) the load torque is increased by 44
Explain the rate constant for the reaction 2hi : The rate constant for the reaction 2HI(g) -> H2(g) + I2(g) doubles on raising the temperature from 683K to 698K. What is the activation energy fro this reaction in kJ/mol
What are the three sources of variability : What are the three sources of variability that are fundamental to operations management?
Use qm for windows to answer this question : What is the probability that there will be 3 or more persons waiting in the system? Use QM for windows to answer this question.
Determine the final speed of the ball : A 0.144 kg baseball is moving towards home plate with a speed of 43.0 m/s when it is bunted. The bat exerts an average force of 6.50 Ã? 103 N on the ball for 1.30 ms, What is the final speed of the ball

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Explain verify that the expressions obtained

Use the Z-transform of u[n] and properties of the Z-transform to find X(z). Verify that the expressions obtained above for X(z) are identical.

  Compare number of transmission paths in hybrid topologies

A star-bus hybrid topology consists of a main three branch star toplogy with each branch connecting three stations in a bus topology. This toplogy is changed to a new bus-ring hybrid topology with main five station bus topology.

  What is the analog output voltage of the d-a converter

What is the voltage output resolution of a 16-bit D/A converter with a 15 volt voltage source Also, what is the analog output voltage of the D/A converter if only the MSB is on

  How many fm radio stations could be accommodated in channel

An ordinary broadcast television channel has a bandwidth of 6 MHz. How many FM radio stations (with a bandwidth of 200 kHz each) could be accommodated in one television channel using FDM

  What are the noise margins for the reasonable output ranges

Suppose that a family of logic gates considers the output ranges of [0 - 0.2V] as "0" and [3.1V-3.3V] as "1". What are the reasonable input ranges for "0" and "1"? (a) "0": [0.1 - 0.4V], "1": [2.3V - 3.3V]; (b) "0": [0-0.3V], "1": [2.8V - 3.0V]; (..

  What is the new resistance level of a copper conductor wire

what is the new resistance level of a copper conductor wire if the lenght is changed from 200 ft to 400 ft, the area is changed from 50,000 CM to 0.10 in ^2 and the original resistance was 7 ohms

  What is the cost of acquiring the land for an area

Your task as an engineer working for this real estate company is to first select a site for the housing venture. You are given that this area in Queens is prone to earthquakes due to seismic faults. The mean detection rate for tremors is 2 per sq...

  Verify the design analytically and with spice

Design an inverting amplifier with a gain of -12 that has an input impedance that is larger than 100K that can drive a 2K resistive load using bipolar transistors. Verify your design analytically and with SPICE.

  Generate a clock signal with 5 khz frequency

Write an asm HCS12 program to flash LEDs on a dragon+ board three times when SW5 is pressed with a 5 kHz frequency, and 50% duty cycle clock signal. Generate a clock signal with 5 kHz frequency, and 50% duty cycle.

  Define design with multiplexer

Define Design with Multiplexer, Design a circuit using one 16 TO 1 multiplexer with W, X,Y,Z on the control inputs

  How the half-adder can be constructed just with nand gates

HALF-ADDER: S = XY' + X'Y , C = XY (These are the outputs) 1. From the equation given for half-adder, develop an equation for which the half-adder can be constructed just with NAND gates. Draw the circuit as per the equation obtained.

  Define a block error detecting code has a minimum distance

A block error detecting code has a minimum distance of three. How many errors can this code detect and how many can it correct

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd