What will be the percentage decrease in specific volume

Assignment Help Civil Engineering
Reference no: EM13320799

Water in a hydraulic press is subjected to a pressure of 4500 psia at 68 degrees F. If the initial pressure is 15 psia, approximately what will be the percentage decrease in specific volume?

Reference no: EM13320799

Questions Cloud

What torque is required to drive the disk at 760 rpm : A flat disk spins within an oil-filled enclosure. Clearances between the enclosure to both sides of the disk is 2.3 mm. The disk surface (area subject to shear) extends from radius 10mm to 90 mm.
Discuss how the marketing strategy : You have been hired as the marketing manager. Research and identify major approaches of how innovations like these are adopted by consumers. Discuss how the marketing strategy for the car needs to rapidly move through these processes.
Estimate the viscosity of water at 30 degree c : The dynamic viscosity of water at 20°C is 1.00 x 10-3 N-s/m2, and the viscosity at 40°C is 6.53 x 10-4 N-s/m2. Estimate the viscosity at 30°C.
What is the permeability : An iron-core solenoid is 43cm long and 1.7cm in diameter, and has 720 turns of wire. What is the permeability %u03BC at this high field strength
What will be the percentage decrease in specific volume : Water in a hydraulic press is subjected to a pressure of 4500 psia at 68 degrees F. If the initial pressure is 15 psia, approximately what will be the percentage decrease in specific volume
Determine the phase angle of the source voltage : An LRC series circuit with R = 100 Omega, L = 56mH, and C =1.7 muF is powered by an ac voltage source of peak voltage V0 = 210 V,  Determine the phase angle of the source voltage relative to the current
Consumer behaviour and retail marketing strategy : CONSUMER BEHAVIOUR AND RETAIL MARKETING STRATEGY
How much is the violin string off tune : A midle C note (262 Hz) is sounded on a piano to help tune a violin string. When the string is sounded, nine beats are heard in 3.0s. How much is the violin string off tune?
What is the true horizontal length of a recorded distance ab : A 100-ft steel tape of cross-sectional area 0.0025 in^2, weight 2.3 lb, and standardized at 68 degrees F is 99.992 ft between end marks when supported throughout under a 12-lb pull.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the carsvelocity and position when t

A car starts from rest and moves along straight line with anacceleration of a = (3s-1/3)m/s2, where s is in meters. Determine the car'svelocity and position when t = 6s

  Determine the specfic work required in kj per kg

Saturated water vapor at 150 deg C is compressed in a reversible steady-flow device to 1000 kPa while its specific volume remains constant. Determine the specfic work required in kJ/kg. The heat transfer is not negligible.

  Determine magnitude of velocity and acceleration of particle

The motion of a particle on the surface of a right circular cylinder is defined by the relations, R = A, theta = 2pi(t), and z=Bsin(2pi)(nt), where A is a constant. Determine the magnitudes of the velocity and acceleration of the particle at any t..

  Determine what is the force acting on the plunger

A plunger applies pressure to the water. If, with zero force, the initial length of the water column is 25.00 in, what will it's length be if a force of 420lbs is applied to the plunger. Assume no leakage and no friction.

  Determine what is the inductance assumed constant

The variable capacitor in the tuner of an AM radio has a capacitance of 135pF. When the radio is tuned to a station at 550kHz what is the capacitance for station at 1600kHz.

  How to sketch p-v diagram as the pressure is raised

The phase diagram of a typical simple substance contains three phases , liquid vapor and solid separated by boundaries . The critical point terminates the liquid-vapor transition, in water it is at Pc=220.9 bar and Tc=374 degres celcius

  Determine the channel slope s under the assumption

For a triangular channel of z=2 side slopes tha tcarries a discharge of 100 cfs at a depth of 5 ft, determine the channel slope S under the assumption that normal flow exists and that n equals 0.022.

  Find the magnitude of the particles position and velocity

The position of a particle P moving in the horizental plane is described by r(t)= (5t^2 i +2te^0.1t j) m. Find the magnitude of the particle's position, velocity, and acceleration at time t=2 sec.

  What are pressure heads at the interface and at the bottom

A stratified lake could be idealized as two layers: with 7.0 m of fresh water on top and 10.0 m of cold water (specific gravity = 1.02) on the bottom. What are the pressure heads at the interface and at the bottom of the lake, in terms of water col..

  Problem related to specific gravity of solids

A soil specimen has a water content of 18% and a wet unit weight of 118.5 lb/cu. ft. The specific gravity of solids is found to be 2.72. Find the:

  Under what condition will both the soil have the same weight

Given Specific Gravity for Soil A is 2.00 and Specific Gravity for Soil B is 4.00, under what condition (Volume of Soil A and Soil B) will both the soil have the same weight

  Is the flow laminar or turbulent

A rectangular concrete channel is 3 m wide and 2 m high. The water 20 deg Celsius in the main channel is 1.5 m deep and is flowing at a rate of 30 m^3/s. determine the flow area, wetted perimeter, and hydraulic radius. Is the flow laminar or turbu..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd