What will be the frequency of vibrations

Assignment Help Physics
Reference no: EM13318261

The springs of a 1500 kg car compress 5.0 mm when its 68 kg driver gets into the driver's seat. If the car goes over a bump, what will be the frequency of vibrations? (answer in Hz)

Reference no: EM13318261

Questions Cloud

Find the speed of sound from the gas properties : Compare the speed of sound following from that slope to the calculated speed of sound from the gas properties
Select best rectangular hss for column to support a device : Select the best rectangular HSS for a column to support a service dead load of 30 kips and a service live load of 90 kips. The member is 22 feet long and is pinned at the ends.
Explain what is the effect on the cell emf : A voltaic cell operating under standard conditions (1.0 M ion concentrations) utilizes the following reaction: 3 Pb(s) + 2 Co3+(aq) 3 Pb2+(aq) + 2 Co(s) What is the effect on the cell emf of each of the following changes
Determine the design strength for lrfd as a column : An HSS 10×6×5?16 with Fy = 46 ksi is used as a column. The length is 16 feet. Both ends are pinned, and there is support against weak axis buckling at a point 6 feet from the top. Determine the design strength for LRFD.
What will be the frequency of vibrations : The springs of a 1500 kg car compress 5.0 mm when its 68 kg driver gets into the driver's seat. what will be the frequency of vibrations
Explain the total molarity of acid and conjugate base : A beaker with 170 mL of an acetic acid buffer with a pH of 5.000 is sitting on a benchtop. The total molarity of acid and conjugate base in this buffer is 0.100 M. A student adds 8.70 mL of a 0.370 M HCl solution to the beaker. How much will the p..
Compute nominal compressive strength for a500 grade b steel : An HSS 10×8×3?16 is used as a compression member with one end pinned and the other end fixed against rotation but free to translate. The length is 12 feet. Compute the nominal compressive strength for A500 Grade B steel
Determine the electric potential at the origin : A charge of -2.205%u03BCC is located at (2.630m , 4.253m ), and a charge of 1.765%u03BCC is located at (-2.793m , 0). Find the electric potential at the origin
What is the force needed and the height to pish it upwards : A block with an inclination of 20 degrees has a weight of 60kg, a height of 1.8m and width 1m, static friction is 0.3, what is the force needed and the height (where the force in the box should be) to pish it upwards

Reviews

Write a Review

Physics Questions & Answers

  Find the change in the blocks mechanical energy

A 15 kg block is accelerated at 1.7 m/s2 up a frictionless plane inclined at 5.0° to the horizontal, find the change in the block's mechanical energy

  How much work is required to move it at constant speed

How much work is needed to move it at constant speed.

  How far will the locomotive roll

A 4.1×104 locomotive, with steel wheels, is traveling at 7.0 on steel rails when its engine and brakes both fail. How far will the locomotive roll before it comes to a stop

  Determine the magnitude of the frictional force on the block

The coefficients of friction between a block of mass 1.0 kg and a surface are ?s = 0.75 and ?k = 0.40. What is the magnitude of the frictional force

  Initially at rest in a uniform electric field with magnitude

A box of books weighing 397 N is shoved across the floor by a force of 543 N exerted downward at an angle of 37 degrees below the horizontal.

  Write the lenght of the curve

A simple pendulum is made from a L long string and a small ball, mass=m, attached to its free end, Write the lenght of the curve s(t) and specify the time period for small oscillations

  What is the net force of the bottom block

consider two blocks of wood, one having mass of 1 kg and the other having a mass of 2 kg. What is the net force of the bottom block

  What is the electric field midway between two charges

A high-speed flywheel in a motor is spinning at 450 rpm when a power failure suddenly occurs. The flywheel has mass 37.0kg and diameter 71 cm. The power is off for 27.0s and during this time the flywheel slows due to friction in its axle bearings...

  Find how far the dog is after that from the shore

You pull your little sister across a flat snowy field on a sled. Your sister plus the sled have a mass of 31 kg. The rope is at an angle of 30 degrees to the ground. As you pull with a force of 30 N, the sled travels a distance of 45 m.

  Find the diameter of the lens aperture

A telephoto lens with focal length of 120mm has f-numbers ranging from f/2.8 to f/22, What is the diameter of the lens aperture at f/2.8? in millimeters

  Find out the moment of inertia of the wheel

A block of mass = 2.90 is attached to a string that is wrapped around the circumference of a wheel of radius = 7.20. The wheel rotates freely about its axis and the string wraps around its circumference without slipping. At first the wheel rotates..

  How would change if the box were sliding up the plane

The spheres are given the same electric charge Q and it is found that they come to equilibrium when each string is at an angle of 5 with the vertical. Each string is 30 cm long.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd