What will be the force in newtons required

Assignment Help Civil Engineering
Reference no: EM13210859

A lunar module weights 1500 kg on earth where g = 9.75 mps2. On the surface of the moon where g = 1.70 mps2, what will be the force in Newtons required to accelerate the module at 10 mps2?

Reference no: EM13210859

Questions Cloud

Explain the temperature of water leaving the heat exchanger : Assume that the heat capacity of water for the temperature rangere in the heat exchanger is constant at 7.54x10^-2 kJ/mol C) What is the temperature of water leaving the heat exchanger?
Study of detection-discrimination or magnitude estimation : Propose a study of detection, discrimination, or magnitude estimation.
Define all three concentrations in molarity : Determine the concentrations of K2SO4, K , and SO42- in a solution prepared by dissolving 2.11 × 10-4 g K2SO4 in 2.00 L of water. Express all three concentrations in molarity.
How much would you have at the end of the first year : What would your $400.43 be worth if you invested it at 1% real interest for 47 years and how much would you have at the end of the first year?
What will be the force in newtons required : A lunar module weights 1500 kg on earth where g = 9.75 mps2. On the surface of the moon where g = 1.70 mps2, what will be the force in Newtons required to accelerate the module at 10 mps2?
Depict two molecules that are diastereomers : Draw two molecules that are diastereomers and calculate the energy of each. Then draw two molecules that are enantiomers and calculate the energy of each.
Determine the torsional moment in the hollow x-section : A concrete box girder bridge has the rectangular x-section. The box is prismatic and considered thin-walled. It span is L=48m and simply supported at points A,B,C and D. The supports are assume to be able to transfer tensile forces.
What is the maximum step height : An open rectangular channel is 50 feet wide, flowing at a depth of 5 feet, and is carrying 1000 cubic feet per second. What is the maximum step height than can be placed into the flow without disturbing the upstream depth, without acting as a chok..
Determine the maximum service load : Determine the maximum service load W (kips) at the mid-height of the beam-column shown in the accompanying figure 2.1. Assume the member is hinged with respect to bending in both x and y directions at the top and bottom.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate net present value

Set up life cycle diagram for both alternatives and calculate net present value (NPT) and annual cost for the life time.

  Set aside the sale of bungalow

Three days later, Abu sees his solicitors and executed the transfer of his said bungalow to Abdul Samad at the said value. Two month later, Abdul Samad expelled Abu from the religious group. Abu now wants to set aside the sale of his bungalow.

  Calculating the undrained shear strength

Calculate the undrained shear strength at a depth of 120 ft below the mudline. Calculate the undrained shear strength at a depth of 120 ft below the mudline if the soil has an OCR of 2.5 .

  What is the average length of queue

Vehicles arrive at a toll booth with a mean arrival rate of 2 veh/min (the time between arrivals is exponentially distributed). The toll booth operator processes vehicles (collects tolls) at a uniform deterministic rate of one every 20 seconds. Wh..

  Probability of finding a bad rivet

Samples of 20 rivets for a steel structure are checked for quality every hour. The probability of finding a bad rivet that has to be scrapped is 1%.assume that x is the number of parts in the sample of 20 that have to be scrapped.

  Conductive heat loss through the furnace wall

Assuming unit surface area, find the conductive heat loss through the furnace wall and the temperature at the interface of the fire clay and red brick.

  Effective vertical stresses of the clay layer

The saturated unit weight of the clay is 20kN/m 3 and that of the sand 19 kN/m 3 ; above the water table the unit weight of the sand is 16.5 kN/m 3 . Calculate the effective vertical stresses at the top and bottom of the clay layer.

  Thermo-gravimetry of calcium oxalate

Evaluate the percent mass loss for each of the three thermal events indicated on the attached TGA trace

  Constant head permeability test

A constant head permeability test was conducted on a clean sand sample. The diameter and length of the test specimen were 10 cm and 12 cm respectively.

  Power developed by the force for a block

The block has a mass of 150 kg and rests on a surface for which the coefficients of static and kinetic friction are 0.5 and 0.4, respectively. If a force F = (60t^2) N, where t is in seconds, is applied to the cable, determine the power developed ..

  Describe the reasons for enhancing drainage and situation

Describe the reasons for enhancing drainage and situation where it is required. Explain some of the detrimental effects of drainage. Describe the types of drainage system indicating suitability criteria. 200- 250 word limit

  Four-lane undivided multilane highway

A four- lane undivided multilane highway ( two lanes in each direction) has 11- ft lanes and 5- ft shoulders. At one point along the highway there is a 4% upgrade that is 0.62 mi long.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd