What will be magnetic moment of the combination

Assignment Help Electrical Engineering
Reference no: EM13248857

A bar magnet is cut into 2 parts ,one part is kept over the other so that the pole c2 is above c1. IF M is magnetic momentof the magnet. What will be magnetic moment of the combination?

Reference no: EM13248857

Questions Cloud

Define patient suffers from medium chain acyl coa mcad : your patient suffers from medium chain acyl CoA MCAD) deficiency. compared to a normal person, you would expect all of the following except
How much charge does the dome hold : A Van de Graaff generator is used to demonstrate the effects of high potential. The device has a radius of 59.7 cm, How much charge does the dome hold at its maximum potential
Which option should the company pursue : which would increase sales by $20,000 under both good and bad conditions. Suppose that good conditions are twice as likely as bad conditions. Which option should the company pursue if developing a system costs $25,000?
What are the factors influencing the development : what are the factors influencing the development of organizational ethis ?
What will be magnetic moment of the combination : A bar magnet is cut into 2 parts ,one part is kept over the other so that the pole c2 is above c1. IF M is magnetic momentof the magnet. What will be magnetic moment of the combination
Explain what is the ph after the addition moles of koh : what is the pH after the addition of 2.7*10-2 moles of KOH to 3.6*10-2 moles HCl if the resulting solution volume is 150mL
Determine whether benchmarking would be useful for improving : Determine whether benchmarking would be useful for improving the quality of the product.
Explain a specific reactions can have many values : the triangleG and triangleG0! both refer to the free energy change in the steady state reaction. steady state means that the concentrations of substrates and products are fixed or constant. all of the following statements about triangleG and trian..
Find the potential energy of this system : Three charges are at rest on the z axis: q1 = ?7.21 mC at z = 4.58 m, q2 = ?1.79 mC at z = 0 m, What is the potential energy of this system

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine the order of the butterworth type lpf filter

Given the DSP system, where the sampling rate of 4000 Hz is used, the anti-aliasing filter is the Butterworth filter with a cut-off frequency of 200 Hz, and the percentage of aliasing level at the cut- off frequency is required to be less than 10%

  Explain spectrum analyzer

Spectrum Analyzer, A spectrum analyzer is connected to an unknown signal. The spectrum analyzer displays the power level of signals in dBm vertically and frequency horizontally. The spectrum of the unknown signal creates the following display:

  Design an integral controller

Improve the controller designed in part by introducing a mechanism for the disturbance compensation at the plant input. Illustrate advantage of the improved controller by applying the fast varying piecewise constant reference input vector and sinu..

  Explain single phase circuit

Single Phase Circuit, A resistor and a capacitor are connected in series across a 150 V a.c supply. When the frequency is 40 Hz the current is 5 A

  Explain deploy a wireless telephone system

You have a bandwidth of 10 MHz (per direction) in a single-cell system and want to deploy a wireless telephone system. You have the following options: analog 30-kHz channels (as in AMPS)

  Define what is correct symbol rate pulse rate for link

What is correct symbol rate (pulse rate) for this link? What is the bit rate with BPSK modulation? What is the bit rate with QPSK modulation?

  Explain what is the maximum message bandwith

What is the maximum message bandwith for which the system operates satisfactorily? Determine the output signal to quantizing noise ratio when a full-load sinusoidal modulating wave of frequency 1 MHz is applied to the input.

  Design a low-pass filter that attenuates the noise

A measurement signal has a frequency less than 1 kHz, but there is unwanted noise at about 1 MHz. Design a low-pass filter that attenuates the noise to 1%. What is the effect on the measurement signal at its maximum of 1 kHz

  How to combine several resistors to get the desired value

Design a load resistor (resistance rating and power rating) network to have the transformer operate at full load. Design a second network for half load. You may need to combine several resistors to get the desired value.

  How to compare the values of h and m obtained

A "ferrite" having a relative permeability of 50 H / m, that operates with flux densities sufficiently small, may be considered a single material. If the magnetic flux density in the material is B = 0.05 T, H and M. halle How to compare the values

  Create another function to allow the user to enter a name

Use the map template to create a phone list for a department. Their should be 10 people in the department. The map will use the person's first name and telephone number. Enter individuals in an unsorted order and then list the persons based on the..

  Find the resistance and inductance of the circuit

an inductive circuit takes a current of 10.5 amperes when connected to a 500 volts 50c/s supply. this current rises to 12.5 amperes when frequency is reduced to 40 c/s. the voltage being maintained constant. find the resistance and inductance of t..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd