Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A water supply pipe of 36 in. diameter was installed 20 yearsago on a slope of 0.1% with n=0.015. a) What was the discharge capacity andvelocity at full flow at the time of installation? b) If the pipe presently carries a flow of15 cfs when full, determine the present velocity and present value of n.
Write a brief paragraph summarizing the following Habitat Simulation Method used to analyze environmental flow requirements.
A floor system consists of wide flange steel beams (W18 x 60) equally spaced at 8ft center to center. A 6inch reinforced concrete slab spans between beams. The bottom of the slab is coated with plaster and the top of the slab has ¾inch hardwood fl..
The average slope distance of 500m was measured with utilizing infrared light with wavelength = .91 um has a modulating frequency at 24.5 MHz. At the time of the measurement, the temperature was 27 degrees C and the atmospheric pressure was 755.1 ..
A flow of 4.8 m3/s is to be developed from a 500 km2 watershed. The reservoir is estimated to cover 1,700 ha. The annual rainfall is 97 cm, the annual runoff is 30 cm, and the annual evaporation is 120 cm
Given: elastic modulus of steel is 200 GPa, yield and ultimate tensile strength of steel are 600 and 750 MPa, respectively.
An ocean outfall diffuser that discharges treated wastewater into the Atlantic Ocean is 5,000 m from a public beach. The wastewater contains 10^5 coliform bacteria per milliliter. The wastewater discharge flow rate is 0.3 m^3/s.
Vehicles A and B are traveling toward each other in the opposing lanes on a straight segment of a two-lane highway at 35 and 40 mph respectively. If the critical rates of angular change of the two drivers are 0.0065 and 0.0055 rad/s,
if a source of groundwater gets contaminated with a DNAPL and another one gets contaminated with a LNAPL, which one will be harder to remediate and why
Knowing that the tension is 120 lb in AB and 40 lb in AD, determine graphically the magnitude and direction of the resultant of the forces exerted by the stays at A
When the air temperature is 25°C, the pressure gage reads 210 kPa. If the volume of the tire is 0.025 m3, determine the pressure rise in the tire when the air temperature in the tire rises to 50°C.
Carbon dioxide flows in a 75 mm diameter PVC pipe at 0.014 kg/s at a pressure of 345 kN/m^2/s abs and a temperature of 10 degrees C. Calculate the head loss in 500 m of pipe.
A truck is traveling down a road with a 3-percent grade at a speed of 55 mi/h when the brakes are applied. Knowing the coefficients of friction between the load and the flatbed trailer (us= 0.40) and (uk= 0.35)
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd