What temperature should the ring be warmed

Assignment Help Physics
Reference no: EM13996694

A steel ring with a 2.500 in diameter at 20 degrees Celsius is to he warned and slipped over a brass shafts with a 2.5030 in outside diameter at 20 degrees Celsius To what temperature should the ring be warmed?

If the ring and the shaft together are cooled by some means such as liquid air, at what temperature will the ring just slip off the shaft?

Reference no: EM13996694

Questions Cloud

Describe four duties of the controlling contractor on a site : Explain the difference in fall protection requirements for connectors working in steel erection between 15 feet and 30 feet in height and connectors working more than two stories or 30 feet in height.
What is the increase in its length : A steel pipe has a length of 10.7 metres at 20C. What is the increase in its length if the steam at 420C runs through this pipe? The coefficient of expansion for steel is 11x10-6 m/ 0Cm.
How large should the gaps be to allow temperatures up : Steel rails 24.0 m long are laid end to end with gaps between them to account for thermal expansion. If the track is laid when it's 15 oC, how large should the gaps be to allow temperatures up to 35 oC? Express your answer to two significant figures ..
What is the percent inaccuracy due to meter resistance : What reading will a voltmeter, of internal resistance 91 Ω, give when used to measure the voltage across each resistor? What is the percent inaccuracy due to meter resistance for each case?
What temperature should the ring be warmed : A steel ring with a 2.500 in diameter at 20 degrees Celsius is to he warned and slipped over a brass shafts with a 2.5030 in outside diameter at 20 degrees Celsius To what temperature should the ring be warmed?
What is length of the combination rod at this temperature : A steel rod 1.00m in length is welded to the end of a 2.00m aluminum rod (where the initial lengths were measured at 22C). The combination rod is then heated to 200C. What is the length of the combination rod at this temperature?
Calculate the tension in the string at the concert : For steel, Young's modulus is 2.0 x 1011 N/m2; and the coefficient of linear expansion is 1.2x 10-5/Co. Use your knowledge of linear thermal expansion and stress to calculate the tension in the string at the concert.
How can information you learned from the team building : How can information you learned from the Team Building and Leadership Class be applied to your life and/or work to increase your future success
What is the present activity in mci : A 60Co source is labeled 4.00 mCi, but its present activity is found to be 1.85 x 107 Bq. (a) What is the present activity in mCi? (b) How long ago did it actually have a 4.00-mCi activity?

Reviews

Write a Review

Physics Questions & Answers

  In a cookbook a poultry thawing chart states that a 10-kg

in a cookbook a poultry thawing chart states that a 10-kg turkey takes 4 days to defrost in a refrigerator. estimate

  Assume that the center of mass is at the middle of the beam

A 35.0 kg person crawls across a 15.0 m long horizontal beam that has a mass of 15.0 kg. The beam has a support line that is at an angle of 65 degrees up from the horizontal.

  Determine the corresponding stopping distance

A person in a car during a sudden stop can experience potentially serious chest injuries if the combined force exerted by the seat belt and shoulder strap exceeds 16,000 N. Assume the mass of passenger is 80 kg and initial speed of car is 16 m/s....

  Find the amplitude and frequency

If an object on a horizontal, frictionless surface is attached to a spring, displaced, and then released, it will oscillate. If it is displaced 0.180 m from its equilibrium position and released with zero initial speed, then after 0.950 s its disp..

  What is the power drawn from the electric outlet

An AC adapter for a telephone answering machine uses a transformer to reduce the line voltage of 120 V to a voltage of 5.00 V. The RMS current delivered to the answering machine is 400 mA. If the primary (input) coil of the transformer has 600 tur..

  Write expressions for angular velocity

The angular acceleration of a wheel is α =6t4-4t2 with α in radians/s2 and t in seconds. Write expressions for angular velocity

  How far did it travel throughout the acceleration

A football is thrown toward a receiver with an initial speed of 20 m/s at an angle of 30.0o above the horizontal. At that instant, receiver is 20 m from the quarterback. In what direction and with what constant speed must the receiver run in order..

  Obtain what is the moment of inertia of the wheel

A wheel of R=.20 m is mounted on a frictionless, horizontal axis,as shown in the figure. A light cord wrapped around the wheelsupports a m=0.50 kg box. What is the moment of inertia I of the wheel

  Find the maximum acceleration

A cup of coffee is on a table in an airplane flying at a constant altitude and a constant velocity, What is the maximum acceleration that the plane can have without the cup sliding backward on the table

  Calculate the force exerted by the hinge on the beam

A uniform beam of length L and of weight 900.00 N is attached to a vertical wall by a hinge. calculate the force exerted by the hinge on the beam

  Find the magnitude of the force-microc charge experiences

A +5.0-microC charge experiences a 0.46-N force in the positive y direction. If this charge is replaced with a charge-2.7-microC, find the magnitude of the force in this case.

  What is the magnitude of the kinetic friction force

An ideal spring with spring constant 600 N/m is on a 30 degree incline. What is the magnitude of the kinetic friction force as the block slides

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd