Reference no: EM13275518
1. Find the stress in both members shown below.
2. What steel specifications are suitable for structural applications?
3. A round bar of AISI 1020 hot rolled, 1 inch in diameter and 20 inches long, is subjected to a tensile of load 10,000 lbs. Compute its elongation due to the stress.
4. A 1-inch square bar of A242 steel is 12 inches long and subjected to impact loading in tension of 10,000 lb. The elongation is limited to 0.3% of the total length. Compute the maximum allowable load.
5. A short post is made by filling a standard 8 x 8 x 1/2 structural steel tube with concrete. The steel has an allowable stress of 21,600 psi. The concrete has a rated strength of 5,000 psi but, in this application is to be limited to 2000 psi. See section 2-10 in your text for the modulus of elasticity for concrete. Compute the allowable compressive load for the post.
6. A drive shaft transmits 90 HP of power at 200 revolutions per minute. The drive shaft is 2 in. diameter and has a 1/8 in. deep groove that has a radius of 1/16 in. The groove has a 2 mm radius. Compute the torsional stress in the drive shaft.
|
Compute its return on common equity
: Suppose a company has a profit margin of 2.5% and an equity multiplier of 2.0. Its sales are $50,000. The common equity is $25,000. Compute its return on common equity (ROE).
|
|
If fingerprints are in blood or liquids
: If fingerprints are in blood or liquids, how will this phenomenon affect the matching of a crime scene fingerprint to an inked fingerprint on a fingerprint card. If so, are there any potential problems with making a successful fingerprint comparison...
|
|
Calculate the output noise power and noise voltage
: A three-stage amplifier is shown. The operating bandwidth is 500 KHz at a temperature od 25 degrees C. The output load is 1000 ohms. calculate the total NF as a number, calculate the output noise power, and calculate the output noise voltage.
|
|
Estimate the tension in the cable
: A rescue helicopter lifts a 84.2-kg person straight up by means of a cable. The person has an upward acceleration of 0.759 m/s2, What is the tension in the cable
|
|
What steel specification suitable for structural application
: Find the stress in both members shown below and what steel specifications (types of steel) are suitable for structural applications?
|
|
Find the inductance l and capacitance c of the circuit
: The bandwith of a series resonant circuit is 400 Hz. if the resonant frequency is 4000 Hz, find Q. and if R = 10 ohms, what is the value of XL at resonance", and Find the inductance L, and capacitance C of the circuit
|
|
What are the differences between get and post methods
: What are the differences between Get and post methods in form submitting, give the case where we can use get and we can use post methods?
|
|
Determine the number of armature conductors and motor speed
: 4-pole , 500 volts shunt motor has a simplex lap winding placed in 80 solts , each cotain 30 conductors . The shunt filed resistance and the armature resistance are 250 and 0.005 ohm respectively . the flux per pole is 0.001 webers
|
|
Compute the company current liabilities and inventories
: Suppose a company has $350,000 in current assets. The company's current ratio is 1.25, and its quick ratio is 0.8. Compute the company's current liabilities and inventories.
|