What should the spring stiffness be if the spring

Reference no: EM13557070

1.What type of pump should be used to pump water at a rate of 32 cfs and under a head of 30 ft?

Assume n=1500rpm

2.A 2 kg block is projected up a frictionless plane with and initial speed of 8 m/s. The plane is inclined upward at 30°. If the block travels 5 m before striking a linear spring, what should the spring stiffness be if the spring compression is to be limited to 10 cm.

Reference no: EM13557070

Questions Cloud

Determine the temperature rise : A 45 W electric mixer is operated for 5 minutes while mixing a 2 kg shake. Assume Csubv=4200 J/kg-K for the liquid. Determine the temperature rise (in degrees C) of the milk shake.

Neglecting drive train losses what is the average power : A cyclist rides up a local mountain at an average speed of 11 mph. The road has an average grade of 5.5%. The cyclist and her bike have a combined mass of 75 kg. The force from road drag is 2.5 N and the aerodynamic drag (in Newtons)

Sub 12 means from stage one to two heat transfer : Sub 12 means from stage one to two. Heat transfer (Qsub12) occurs to a fluid of mass m whose volume increases at a constant pressure of 21 bar. Assume that the fluid is air (Csubv=0.718 kJ/kg *K and R=0.287 kJ/kg*K) and that Tsub1=725K and Tsub2=1100..

What is the change in internal energy of the system : What is the change in internal energy of the system? Assume the displacement work in a (fully resisted) constant pressure process is given by (*sub 12 means from stage 1 to 2) Wsub12=p(Vsub2-Vsub1).

What should the spring stiffness be if the spring : A 2 kg block is projected up a frictionless plane with and initial speed of 8 m/s. The plane is inclined upward at 30°. If the block travels 5 m before striking a linear spring, what should the spring stiffness be if the spring compression is to be l..

What is the concentration of bod in the river-wastewater mix : Compare the monolithic approach, the layered approach, and the microkernel approach in terms of degree of difficulty to debug, portability, efficiency, and degree of structure.

How much heat energy is radiatred from each of the disk : Given the heat transfer of the disk rotor is 120 W/m2/K, how much heat energy is radiatred from each of the disk rotors when the ambient air temperature is 30 C

What is the concentration of particles in the air : A hi-vol clean filter weighs 18.00 g. After a 24 hour sampling period the filter is removed and weighs 18.65 g. The initial flow rate through the filter was 2.5 m3/min. When the filter was removed the flow rate through the filter was 1 m3/min. What i..

Determine the magnitude of the force of the rod on the : Using a forked rod, a smooth cylinder C having a mass of 0.5 kg is forced to move along the vertical slotted path r = 0.5? m, where ? is in radians. If the angular position of the arm is ?

User Account

All Pages