What should be the dimensions of the channel

Assignment Help Civil Engineering
Reference no: EM13563736

A trapezoidal channel is to design to carry a discharge of 75 m3/s at maximum hydraulic efficiency. The side slope of the channel is 2 H/1 V at the left and slope of right side is 3H/1V. The Manning n value is 0.030.

- If the maximum allowable velocity in the channel is 1.75 m/s, what should be the dimensions of the channel?

Hint: For most efficient channel B=2L, but B=2L can not be used since we have different slopes, therefore write in terms of L and derive.

Reference no: EM13563736

Questions Cloud

Prove that any polygon admits a triangulation : Prove that the smallest angle of any triangulation of a convex polygon whose vertices lie on a circle is the same. This implies that any completion of the Delaunay triangulation of a set of points maximizes the minimum angle.
What is the transistors emitter current : Ethane gas (C2H6) at 25C is burned with 150% theoretical air at 500 K and 1 atm. Find the heat transfer (in KJ/Kmol)from a steady-flow combustor if the products are at 1000 K and (a) complete combustion occurs; (b) 95% of the carbon is converted to C..
How does the nature of the boundary layer affect lift : Sitting on the deck one evening. watching for that pesky bunny, jon and his brother see a twig floating down from an aspen tree. (wait - os that a bunny ?) they wonder just what the boundary layer looks like on the twig.
At what angle should the pilot direct the aircraft : A small aircraft A is about to land with an airspeed of 80 mi/hr. if the aircraft is encountering a steady side wind of speed vw=10 mi/hr as shown, at what angle
What should be the dimensions of the channel : A trapezoidal channel is to design to carry a discharge of 75 m3/s at maximum hydraulic efficiency. The side slope of the channel is 2 H/1 V at the left and slope of right side is 3H/1V. The Manning n value is 0.030.
Deteremine the maximum in-plane and out-of-plane shhear : A pressurized steel tank has a radius r=0.6m, a wall thickness t=18mm and an internal pressure p of 2.8 MPa.The steel has a modulus of elasticity E of 200 GP and a poissons ratio 0.30.Determine the hoop and axial stressses
Determine the maximum stress and strain in the ball : A rubber ball is inflated to a pressure of 65 kPa .At that pressure the diameter of the ball is 240mm and the wall thickness is 1.25 mm.The rubber has a modulus of elasticity E of 3.6 Mpa and a poisoon'd ratio of 0.48.
What is the maximum internal pressure : A cylindrical pressure vessel can support an internal pressure of 2640 psi. The maximum hoop stress is (65000/2) psi and the maximum shear stress is 16000 psi. If the diameter of the tank is 7 inches,what is the minimum wall thickness. If the wall th..
Determine the maximum shear stress in the material : An element of aluminiun in the form of a rectangular parallel pipe has a length 'a' along the x axis of 5.5 inches, a length 'b' along the y axis of 4.5 inches and a length 'c' along the z axis of 3.5 inches.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine how much the thickness of the dnapl layer has

Determine how much the thickness of the DNAPL layer has to build up with similar capillary characteristics but 1.08 g/cm3 density to migrate through a bed of fine sand of 0.5 mm diameter.

  Calculate the escalaed dollar irr for an escalated dollar

an investment of $80,000 is projected to generate escalated dollar net revenues (income minus costs) of $10,000 in year one, $30,000 in year 2 and $40,000 in year 3 with a $100,000 salvage value at the end of year

  At what concentration in ppmv is risk from trichloroethylene

At what concentration in ppmv (1.0 atm, 25 C) is the risk from trichloroethylene exposure at an industrial facility equal to 10^-4 for a 70-kg adult male, if the lifetime exposure occurs for 310 days per year over 29 years

  How long does it take to drain the tank to 50

A cylindrical tank 5-m in diameter is filled with water to 3-m depth. A very short horizontal pipe with 20-cm diameter and rotary valve is used to drain the tank from the bottom. How long does it take to drain the tank to 50%?

  Explain will the beam be able to bear the load

The beam is designed tohold a 10kN heating unit at mid span. There are no other loads onthe beam. Using G40.21 350W steel, select the lightest W shapes forthe beam.

  Determine the minimum force p to prevent a 30kg rod ab from

Determine the minimum force P to prevent a 30kg rod AB from sliding on a wall. The contact surface at B is smooth, whereas the coefficient of static friction between the rod and the wall at A is Us=0.2.

  Determine what were the size of the deposits

Uniform deposits were made on January 1 of 1991, 1992, 1993, and 1994 into a fund intended to provide $1000 on January 1 of 2005, 2006, and 2007. What were the size of these deposits

  Find probability that all twenty calls go through right away

The phone lines to an airline reservation system are occupied 40% of the time. assume that the events that the lines are occupied on successive calls are independent. assume that 20 calls are placed to the airline.

  Specify device describing briefly its principle of operation

Specify a device describing briefly its principle of operation, that is typically installed downstream of a bursting disc as an indicator of disc rupture,

  Does the subject driver have enough time to read the sign

The letter size is such that the sign can be ready by a person with 20/20 vision from a distance of 200 ft. Does the subject driver have enough time to read the sign at a speed of 30 mi/h

  Calculate fraction of total atrazine that will be adsorbed

Calculate the fraction of total atrazine that will be adsorbed to the soil given that the soil has an organic carbon content of 2.5%. The bulk density of the soil is 1.25 g/cm3; this means that each cubic centimeter of soil (soil plus water) conta..

  What is the lowest grade possible for the constant-grade

A tangent section of highway has a -1.0% grade and ends at station 4+75 and elevation 82 ft. It must be connected to another section of highway that has a -1% grade and that begins at station 44+12 and elevation 131.2 ft.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd