What setting should ddrb have

Assignment Help Other Engineering

Reference no: EM131452905

Assignment

1. PORTB of an HCS12 is wired up so that bits 1 and 2 are connected to outputs and bit 0 is connected to an input. The input is wired to a switch, and the input is 0 if the switch is pressed and 1 if the switch is released. The two outputs are LEDs, and are wired so that writing a 0 turns OFF the LED and writing a 1 turn ON the LED.The schematic is shown below.

a. What setting should DDRB have?

b. Draw a flowchart to do the following: Test the input bit. If the switch is pressed, turn on both LEDs. If the switch is released, turn off both LEDs.

c. Write a subroutine to implement the flowchart. PORTB is at memory address $0001.

2. The HCS12 has several interrupt sources, almost all of which can be controlled via the I flag in the condition-code register.

a. Is the I flag active-high or active-low? That is, which state of the I flag indicates that interrupts are enabled?
b. Which instruction makes the interrupt flag active (enables interrupts)?

3. Watch the Podcast about digital interfacing, and answer the following short questions.

a. An HCS12 uses 5 Volts and is driving an LED. When the LED is on, it has a forward voltage of 1.8 Volts and draws 18 mA. What size current-limit resistor is needed?

b. What part turns on and off inside a relay in order to operate the switch?

c. Name an example of a chip or device that has enough drive strength to operate a relay that requires 100 mA of coil current.

d. Name an example of a device that protects circuits from too much current.

Reference no: EM131452905

Questions Cloud

What is an employee assistance program : What is an Employee Assistance Program (EAP)? How can an EAP be used to positively manage employee relations and performance

How many presses are needed : A stamping plant must be designed to supply an automotive engine plant with sheet metal stampings. The plant will operate one 8-hr shift.

Describe ocbc unique approach to talent management : Describe OCBC's unique approach to talent management and development.

Determine the number of forging cells : A new forging plant must supply parts to the automotive industry. Because forging is a hot operation, the plant will operate 24 hr/day.

What setting should ddrb have : What setting should DDRB have? What part turns on and off inside a relay in order to operate the switch? Name an example of a device that protects circuits.

Argue for or against the limitation of speed limits : PSCI 2231 : Write a composition using one of the topics listed below. Your composition needs to be three to five paragraphs long.

Method for making wise decisions in the face of uncertainty : Comment on the statement bringing out clearly how does statistics help in business decision-making.

What is the utilization during peak hours : An AS/RS is used for work-in-process storage in a manufacturing facility. The AS/RS has five aisles, each aisle being 120 ft long and 40 ft high.

Describe concepts as if you were explaining them to a friend : Describe the concepts as if you were explaining them to a friend. How will you use the concepts in the class or in your personal or professional life?

User Account

All Pages