What pressure inside the chamber is needed

Assignment Help Civil Engineering
Reference no: EM131238542

1. A jet engine receives a flow of 150 m/s air at 75 kPa, 5?C, across an area of 0.6 m2 with an exit flow at 450 m/s, 75 kPa, 800 K. Find the mass flow rate and thrust

2. How large a force must be applied to a squirt gun to have 0.1 kg/s water flow out at 20 m/s? What pressure inside the chamber is needed?

Reference no: EM131238542

Questions Cloud

Determine the static temperature and pressure : Air leaves a compressor in a pipe with a stagnation temperature and pressure of 150?C, 300 kPa, and a velocity of 125 m/s. The pipe has a cross-sectional area of 0.02 m2. Determine the static temperature and pressure and the mass flow rate.
Discuss which ones of these theorems seem more useful to you : Discuss which ones of these theorems seem more useful to you. Which one(s) do you find easiest or more difficult to use and why?
Find the anchoring forces fx and fy : A 4-cm inner-diameter pipe has an inlet flow of 10 kg/s water at 20?C, 200 kPa. After a 90 degree bend, as shown in Fig.P15.24, the exit flow is at 20?C, 190 kPa. Neglect gravitational effects and find the anchoring forces Fx and Fy.
Estimate the size of effect : In an independent groups experiment, data analysis resulted in t-obt= 3.25 and N= 30. Estimate the size of effect
What pressure inside the chamber is needed : How large a force must be applied to a squirt gun to have 0.1 kg/s water flow out at 20 m/s? What pressure inside the chamber is needed?
Randomly selected american : The probability that a randomly selected American has disease A is p = 0.04. If 12 people are randomly selected from the population, what is the probability that at least ten of them do not have disease A?
Can a convergent adiabatic nozzle produce a supersonic flow : Is the stagnation temperature always higher than the free stream temperature? Why?
How biases might affect courtroom proceedings : How racial disparity in sentencing affects the judicial system. A summary of one of the articles discussed in your collaborative group this week. What are your personal thoughts on the issue covered by the article?
Required course for an undergraduate degree : Stat 200 is a required course for an undergraduate degree.  Of 9867 students taking this course in one year, 6547 passed with a grade of "C" or better.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the steady-state concentration of the pollutant

A well-mixed sewage lagoon (a shallow pond) is receiving 430 m^3/d of sewage out of a sewer pipe. The lagoon has a surface area of 10 ha (hectares) and a depth of 1 m. The pollutant concentration in the raw sewage discharging into the lagoon is 18..

  How much time will it take for chemical to reach concention

Chemical ‘x' is regulated by EPA and the maximum allowable concentration in water is 10g/L. 1000 kg of chemical ‘x' is released in a lake (volume 1,000 m3) where it undergoes degradation as a first order reaction process

  Determine minimum resale price needed to make the challenger

A lumber company that cuts fine woods for cabinetry is evaluating if it should retain the current bleaching system or replace it with the new one. The relevant costs of each system are known or estimated.

  Determine the depth of water in the pond

water is pumped into an irrigation pond at 250 gal/min for 24 hours. the pond area is 2500 square feet. Determine the depth of water in the pond .Provide answer in ft and m

  Define flow at a hydraulic jump in terms of flow

Define flow at a hydraulic jump (upstream and downstream) in terms of the types of flow and corresponding Froude number. What is the depth of water at each section (upstream and downstream) compared to critical depth

  Match each transformation description below with the name

Match each transformation description below with the name of a corresponding transformation. Diffusion-dependent with change(s) in phase composition(s) Diffusionless Diffusion-dependent with non change(s) in phase composition(s) The things you match ..

  Determine the maximum force p that can be applied

The coefficient of static friction between each crate and the ground is 0.25 The crates are next to each other connected by a rope and then from the other end one has a P force going up at an angle of 30 degrees

  Write a program that allows the user to enter a payroll code

Write a program that allows the user to enter a payroll code. The program should search for the payroll code in the file and then display the appropriate salary. If the payroll code is not in the file, the program should display an appropriate messag..

  Determine design compressive strength for pinned ended hss

Determine the design compressive strength for a pinned ended HSS 8x8x3/8 column of ASTM A500, grade B steel with an unbraced length of 35ft

  Determine the r-134a exit temperature in the enthalpy

At compressor exit, the specific entropy is the same as that at the inlet, and the pressure is 60 psia. Determine the R-134a exit temperature and the change in the enthalpy of R134a.

  Calculate the linear misclosure and relative precision

Balance by the compass rule the departures and latitudes listed in the following closed-polygon traverse. Calculate the linear misclosure, relative precision, and adjusted lengths and bearings

  The 70 m tall tower is supported by three cables that exert

the 70 m tall tower is supported by three cables that exert forces fab fac and fad on it. the magnitude of the force

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd