What percentage of the time will the through lane adjacent

Assignment Help Civil Engineering
Reference no: EM13564965

A traffic engineer is trying to design a left turn bay on an EB approach to an intersection. The signal timing for left turns will have 10 seconds of “left turn only” green time and 50 seconds of red time each signal cycle. The green time will be sufficient to allow three left turns to be made each signal cycle. An average of 2.5 left-turning vehicles are expected to approach the intersection each signal cycle. Space is limited, so the engineer wants to minimize the storage capacity of the turn bay, but insufficient capacity will cause the excess vehicles waiting for a green light to block through traffic. If the turn bay has capacity for only three vehicles, what percentage of the time will the through lane adjacent to the left-turn bay be blocked?

Reference no: EM13564965

Questions Cloud

What is the mean time between counts : Suppose the counts recorded by a Geiger counter follow a Poisson process with an average of three counts per minute.
Find the bottom width and the depth of water channel : The rate of flow through a trapezoidal open channel is 20 m^3/s and the mean velocity of flow is 1m/s . the side slope is 1:1 and the bed slope is 1 in 5000. Assume Chezy's constant C as 60, find the bottom width and the depth of water channel.
Determine the thickness of the oil film assuming a linear : A solid cube with a side length of 0.4 ft and a weight of 110 lb slides down a smooth surface that is inclined at 45 degrees to the horizontal. The block slides on a film of oil with a viscosity of 1.85 x 10-2 lb-s/ft2. If the velocity of the block i..
What is the diameter of the capillary tube assuming it has : You are designing a new thermometer using Galinstan, an alloy of gallium, indium, and tin that is a liquid at normal living temperatures. The coefficcient of thermal expansion is 190*10^-6 (1/kelvin).
What percentage of the time will the through lane adjacent : A traffic engineer is trying to design a left turn bay on an EB approach to an intersection. The signal timing for left turns will have 10 seconds of “left turn only” green time and 50 seconds of red time each signal cycle. The green time will be suf..
Estimate the evaportranspiration losses for the area : Adriana wishes to accumulate $2,020,000 in 35 years. If 35 end-of-year deposits are made into an account that pays interest at a rate of 7% compounded annually, what size deposit is required each year to meet Adriana's stated objective?
How many cubic meters of borrow pit material is needed : The water content at 95% compaction is 11% on the dry side and 12% on the wet side of the compaction curve. What is the minimum additional weight of water per unit volume to achieve 95% Proctor compaction?
What is the concentration of residual nh3 in the aqueous was : Waste dairy whey is used to grow Kluyveromyces fragilis yeast in a continuous culture system operated at 30C and 1 atm pressure. Medium containing 4% w/w lactose (C12H22O11) and 0.15% w/w NH3 flows into a specially designed aerated bioreactor at a ra..
Determine the upstream depth of flow in a subcritical : Determine the upstream depth of flow in a subcritical transition from an upstream rectangular flume that is 49ft wide to a downstream trapezoidal channel with a width of 75ft and side slopes

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate carbonate-noncarbonate and total hardness

Calculate carbonate, noncarbonate, and total hardness Na+ = 27.8 mg/L Cl- = 35.6 mg/L Ca+2 = 48mg/L CO3-2 = 30 mg/L Mg+2 = 12mg/L HCO3- = 61 mg/L K+ = 12 mg/L SO4-2 = 48 mg/L

  Estimate the storage change for the lake during the month

A lake with a surface area of 525 acres was monitered over a period of time. During a 1 month period the inflow was 30 cfs, the outflow was 27 cfs, and a 1.5 in. seepage loss was measured.

  How sustainability and green engineering can be integrated

Discussion on how sustainability and green engineering can be integrated in the four components of materials science and engineering?

  Determine the forces fx and fy necessary to hold the pipe

Water flows steadily through a horizontal 30 degree upward bend. The inlet diameter is 0.3 m, the velocity is 12 m/s, and the pressure is 128 kpa gage. The outlet diameter is 0.38 m and the pressure is 145 kpa gage.

  Determine the placement d of the column at b

The concrete girder supports the two column loads. If the soil pressure under the girder is assumed to be uniform, determine its intensity w and the placement d of the column at B.

  At what angle should the pilot direct the aircraft

A small aircraft A is about to land with an airspeed of 80 mi/hr. if the aircraft is encountering a steady side wind of speed vw=10 mi/hr as shown, at what angle

  Determine substrate concentration and biomass concentration

how to determine the substrate concentration and biomass concentration at 0.5 days. Use spreadsheet to solve for the concentrations with a delta t = 0.01 days

  Determine slenderness ratio l per r and euler buckling load

An aluminum alloy tube with an outside diameter of 2.9 in. and a wall thickness of 0.32 in. is used as a 19-ft-long column. Assume that E = 8300 ksi and that pinned connections are used at each end of the column.

  What is the maximum distance away that the navigation lights

What is the maximum distance away that the navigation lights can still be seen by an observer standing at the shoreline The observer's eye height is 5'6" and the uppermost navigation light is 168 above the water.

  Calculate the final length and the final diameter of the

A cylinder with a 6 in diameter and 12 in length is put undera compressive load of 138.4 kips. The modulus of elasticity for thespecimen is 6500 ksi and Poissons ratio is 0.4. Calculate the final length and the final diameter of the specimen under th..

  What are the possible combinations of inflow and outflow

what are the possible combinations of inflow and outflow of water in the tank in a given day. if the water level in the tank is 7ft from the bottom at the start of day, what are the possible water levels in the tank at the end of the day.

  Determine the maximum force the hand can apply

assume that the whole twisting moment is taken by the bone. If the humerus can withstand a shear stress Tmax=70.0 MPa, determine the maximum force the hand can apply without fracturing the humerus. The length of the forearm is 360 mm.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd