User Account

All Pages

What mah capacity should the batteries have

Assignment Help Electrical Engineering
Reference no: EM13228237

A student project is required to be portable and hand held. It requires 6 V DC power at a current of 150 mA. The batteries for the power supply must last for a minimum of 7 hours of continuous operation. NiMH rechargeable batteries in AA size are to be used. A) How many batteries are needed? B) What mAh capacity should the batteries have?

Reference no: EM13228237

Questions Cloud

Explain how many electrons are present in an atom : How many electrons are present in an atom with its 1s, 2s, 2p, and 3s subshells filled and with 4 electrons in the 3p subshell? What is the element?
What benefit does the isr have over standard polling code : What distinguishes an external interrupt from an RTI interrupt Describe what transpires when an interrupt occurs What is an interrupt service routine What benefit does the ISR have over standard polling code
Explain how many grams of carbon tetrachloride are required : According to the following reaction, how many grams of carbon tetrachloride are required for the complete reaction of 21.1 grams of methane (CH4)?
What distinguishes a control data value from a character : Describe the steps in the keypad polling routine. Draw a flow chart for the keypad LCD software code. Discuss challenges experienced in developing the keypad LCD software code.
What mah capacity should the batteries have : A student project is required to be portable and hand held. It requires 6 V DC power at a current of 150 mA. The batteries for the power supply must last for a minimum of 7 hours of continuous operation.
Explain what is kc for the reaction at the temperature : When an 80.0 liter vessel containing 2.00 mole of NO2(g) was heated to 200oC, 6% of the NO2(g) decomposed to NO(g) and O2(g). What is Kc for the reaction at this temperature?
Define coordination number is expected for zinc sulfide : Based on the cation/anion radius ratio, what coordination number is expected for Zinc Sulfide
Explain what is the hydronium-ion concentration : What is the hydronium-ion concentration of a 0.40 M solution of HCN (Ka= 4.9×10-10) at 25° C?
Determine the complex impedance of the material : A sirloin steak (e'r = 52.4, µr = 1, tan dc = 0.33) is to be heated in a microwave oven operating at 2.45 Ghz. (a) Determine the uniform plane wave penetration depth. (b) Determine the complex impedance of the material.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate the wavelength

The surface of the sun has a temperature of 6000 K. Calculate the wavelength at which the sun emits its peak radiancy.

  Calculate the free space loss-received power and fade margin

Perform a link budget for a 25-kilometer point-to-point microwave link in the 30 GHz band. Calculate the free space loss (dB), received power dBm), fade margin (dB), and Fresnel zone radius(m) given the following: Tx Power = 70 dBm

  Select the amplitude a to produce an average power

The message signal x(t), in the following system has a nabdwidth of 10kHz. The center frequecy of the Narrow Band Frequency Modulated (NBFM) signal nbfm(f) is 1Mhz, the frequency deviation f1=1khz and the amplitude of the NBFM signal is 1V.

  Calculate the internal resistance

the output voltage of battery drop from 6V .With no load to 5.2V with a load current of 400mA. calculate the internal resistance.

  Determine the high-pressure turbine work per unit mass

The temperature of steam at the inlets of both turbines is 500°C, and the enthalpy of steam is 3185 kJ/kg at the exit of the high-pressure turbine, and 2247 kJ/kg at the exit of the low-pressure turbine. Disregarding the pump work, determine the w..

  Write a program to genrate a square wave

assuming XTAL=11.0592 MHz,write a program to genrate a square wave of 20 Hz frequency on pin2.3?

  What is the quantization signal to noise ratio snrq

What is the quantization signal to noise ratio SNRQ at the receiver output? e. If the SNRQ were to be raised to 96 dB, how many bits would the ADC and DAC need? What would be the bit rate on the serial link?

  The base class must as well have a virtual print

The base class must also have a virtual print() function that displays the class name. Randomly assign print functions in three other classes that display the class name. Create 7 pointers of the base class and have them point to all the classes.

  What is the maximum allowable resistor size

Design a DC current source to meet the following specifications: - Current source value: 100 u-amps +/- 1% (over all possible load and supply voltage conditions). - Output resistance: >20 Mohms. - Available DC voltage sources are bipolar and range fr..

  What is the minimum sampling frequency for a/d conversion

A video signal contains light variations that change at a frequency as high as 3.5 MHz. What is the minimum sampling frequency for A/D conversion?

  How to generate odd parity over the individual words

Design a system using either a flow diagram or pseudo code that will accept a block of data words encoded as specified in Part 1; then check the parity for each data word and for the block. The system should output each of the 8-bit data words.

  What is the internal resistance of the battery

When the starter motor, which draws 90A, is running the terminal voltage drops to 11V. What is the internal resistance of the battery What percentage of the chemical power is delivered to the starter motor

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd