What is the undrained shear strength of the clat in kpa

Assignment Help Civil Engineering
Reference no: EM13313223

A saturated clay deposit is vane-tested in-situ. A torque of 30Nm is required to shear the clat. The vane is 40mm wide by 100mm long.

What is the undrained shear strength of the clat in kPa?

Reference no: EM13313223

Questions Cloud

How fast is she going when she reaches the bottom : A novice skier, starting from rest, slides down a frictionless 33.0° incline whose vertical height is 128 m. How fast is she going when she reaches the bottom
What will be the amount of deposits at the end : What will be the amount of deposits at the end of each year if it is compounded at 12% semi-annually
Find the net work done on the box : A box of mass 5.4 kg is accelerated from rest by a force across a floor at a rate of 2.0 m/s2 for 9.0 s. Find the net work done on the box
Period expense, direct cost or indirect cost : Period expense, direct cost or indirect cost.
What is the undrained shear strength of the clat in kpa : A saturated clay deposit is vane-tested in-situ. A torque of 30Nm is required to shear the clat. The vane is 40mm wide by 100mm long. What is the undrained shear strength of the clat in kPa
Find its resulting charge : A soot particle, originally neutral, gets charged in a process that removes 27 electrons. Find its resulting charge
Define a class called counter : Define a class called Counter. An object of this class is used to count things so it records a count that is a non-negative whole number. Include methods to set the counter to 0, to increase the counter by 1, and to decrease the counter by 1.
Determine what is the pore water pressure at that level : A river is 6m deep. The riverbed material has a saturated unit weight of 19.5kN/m3. What is the effective vertical stress 12m below the water surface. Assume the water is static and assume a datum at the water surface.
Explain sodium bromide plus sodium sulfide : What is the name of the compound when you say Sodium Bromide plus Sodium Sulfide. Also, please write the formulas for each.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Ratio of the magnitude in uniform electric field

What is the ratio of the magnitude of E2 to the magnitude of E1? You may neglect the effects of gravity on the proton.

  How far stream of section would expect to find uniform flow

The slope of the channel is .15% and the mannings roughness coefficient is .038. estimate the depth 100m upstream of a section where the flow depth is 2.2m using the standard step method. Approximate how far upstream of this section would you exp..

  Estimate convective heat transfer coefficent for natural

Estimate the convective heat transfer coefficent for natural convenction from a horizontal steam pipe. The outside surface temperature of the insulated pipe is 80 degree C. The surrounding air temperature is 25 degress C.

  Determine what is the runoff rate into the inlet grate

A paved parking lot section has a uniform slope over a length of 100 m (in the flow direction) from the point of a drainage area divide to the inlet grate, which extends across the lot width of 30 m.

  How to plot the shear and moment across the beam

Write the equations required to express the shear and moment along the entire length of beam. Use an origin at point A, and then repeat computations using an origin at point D. Plot the shear and moment across the beam.

  Determine the principal stresses and the principal angle

using the stress transformation quations only,given a stress state where sigma x=6500 psi,sigma y= 17,300 psi and tau xy=2900 psi, determine the principal stresses,the principal angle and the maximum shear stress.

  Compute the modulated wavelength under the humidity

The average slope distance of 500m was measured with utilizing infrared light with wavelength = .91 um has a modulating frequency at 24.5 MHz. At the time of the measurement, the temperature was 27 degrees C and the atmospheric pressure was 755.1 ..

  What is the ratio of the magnitude of e2 to the magnitude

What is the ratio of the magnitude of E2 to the magnitude of E1? You may neglect the effects of gravity on the proton.

  Find and plot initial vertical effective stress distribution

A 35 feet diameter oil storage tank is built on a 100 ft thick soil layer. The tank exerts an uniform pressure of 1000 pcf on the ground surface. The groundwater table is 10 ft below the ground surface.

  How much energy do methanogenic bacteria get from h2

How much energy do methanogenic bacteria get from using glucose and hydrogen (H2) to form methane and water as the products. Determine the net reaction (assume methane and water are the only products).

  Concentration of moles in the tank solution

HOCL is added to water in a tank as a disinfectant. After equilibrium is reached it is found that the pH of the water in the tank is 8.2 and the gas phase partial pressure is the head space of the tank is 0.2E-7 atm.

  Determine what is flexural rigidity ei of the diving board

Consider a diver weighing 200 lb at the end of a diving board that cantilevers out over 3 ft. The diver oscillates at a frequency of 2 Hz. What is the flexural rigidity EI of the diving board

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd