What is the tree horizontal length of the recorded slope

Assignment Help Civil Engineering

Reference no: EM13544533

A 100 ft steel tape of cross-sectional area 0.0025 in^2, weight 2.3 lb, and standardized at 68 degrees F is 99.992 ft between end marks when supported throughout under a 12-lb pull. What is the tree horizontal length of the recorded slope distance BC for the conditions shown:

Recorded slope distance BC(ft): 95.08

Average Temperature per 100 ft(degrees F): 48

Tension(lb):15

Elevation Difference(ft): 2.45

Reference no: EM13544533

Questions Cloud

What will be the ratio of the mass of natural gas : Natural gas is stored in a spherical tank at a temp. of10oC. At a given initial time, the pressure in thetank is 100 kPa gage, and the atmospheric pressure is 100 kPaabsolute

Explore the advantages and disadvantages of law making : Explore the advantages and disadvantages of law making

Determine the maximum height the projectile will reach : A projectile is fired up into the air at a speed of 161 m/s at an angle of 64° relative to the horizontal. Determine the maximum height the projectile will reach.

What would the manometer reading be for the same pressure : Two vessels are connected to a differential manometer using mercury (s=13.56), the connecting tubing being filled with water. The higher-pressure vessel is 5 ft lower in elevation than the other

What is the tree horizontal length of the recorded slope : A 100 ft steel tape of cross-sectional area 0.0025 in^2, weight 2.3 lb, and standardized at 68 degrees F is 99.992 ft between end marks when supported throughout under a 12-lb pull. What is the tree horizontal length of the recorded slope distance BC..

What would you expect the barometer reading : A scientist plans to build a water barometer. When the atmospheric pressure is 990 mb abs and the water temperature is 70 degrees Celsius, what would you expect the barometer reading (water rise) to be?

What torque is required to drive the disk at 760 rpm : A flat disk spins within an oil-filled enclosure. Clearances between the enclosure to both sides of the disk is 2.3 mm. The disk surface (area subject to shear) extends from radius 10mm to 90 mm

If the required compaction is 95 percent of the target how : Base course aggregate has a target dry density of 119.7 lb/cu ft in place. It will be laid down and compacted in a rectangular street repair area of 2000 ft*48ft*6in. the aggregate in the stockpile contains

Determine the force of gravity acting between them compare : Two particles have a mass of 8 Kg and 12 Kg respectively. if they are 800 mm apart, determine the force of gravity acting between them. Compare this result with the weight of each particle.

User Account

All Pages