What is the thickness of the cake at the end of the cycle

Assignment Help Chemical Engineering
Reference no: EM132052202

A slurry containing 5 g of solids per liter is passed through a filter at a constant flow rate of 50 L/min. The filter has an area of 400 cm^2. The liquid is water with a viscosity of 1 cP and density of 1 kg/L. The solids can be considered spheres with an average diameter of 0.1 mm and density 1.25 kg/Land the cake accumulated on the filter has a void fraction of 0.35.

(a) Assuming that the Blake-Kozeny equation applies, derive an expression to calculate the pressure drop through the cake as a function of time.

(b) If the maximum pressure drop allowed through the filter is 500 kPa, how long can the filter run before it needs cleaning?

(c) What is the thickness of the cake at the end of the cycle?

Reference no: EM132052202

Questions Cloud

Analyze the market for the organization product : For the course project of this course, you will select an organization, analyze the market for the organization's product/service.
What is the initial flow rate of water from the tank : A water tank is 10 m in diameter and the normal depth is 8 m. The outlet is a short 3-inch internal diameter horizontal pipe at the bottom.
Explain functions and data measurements of the balance sheet : Explain the functions and data measurements of the balance sheet, income statement, and statement of cash flows. Explain how these financial statements.
What is the composition of the vapor leaving equilibrium : The relative volatilities are aBT = 2.5, aTT = 1.0 and aCT = 0.21. What is the composition of the vapor leaving equilibrium stage above the partial reboiler?
What is the thickness of the cake at the end of the cycle : If the maximum pressure drop allowed through the filter is 500 kPa, how long can the filter run before it needs cleaning?
Estimate the distillate and bottoms flow rates : a. Estimate the distillate and bottoms flow rates. b. Estimate the distillate and bottoms weight fractions of alcohols.
Determine how are virtues acquired : What is a virtue? How are virtues acquired? Do you agree with Aristotle's claim that virtue is essential to the good life? Why or why not?
Determine the average molecular mass of a mixture : Assuming ideal gas behavior, determine the average molecular mass of a mixture made of equal amounts of mass of chlorine, argon, and ammonia.
What kind of population would you guess was here : what kind of population would you guess was here? How many people?

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Determine the voltages induced in the stator

Consider Example 12.4.1. With the assumed current-source excitations of part (c), determine the voltages induced in the stator and rotor windings at the corresponding angular velocity ωm at which an average torque results.

  What conclusions about photosynthesis can be drawn

When algae growing in water containing only 16O were furnished carbon dioxide containing 18O, no 18O was found to be evolved from the oxygen gas produced. What conclusions about photosynthesis can be drawn from these experiments?

  Simulation of a process for the production of heptene

CHEN3003 Process Synthesis & Design - Perform an extension study related to process synthesis and design, explaining the benefits of the study, your method

  Calculate the theoretical stages needed to separate

Calculate the theoretical stages needed to separate a 10 mole% ethanol liquid saturated feed into a 80 mole% distillate and a 0.1 mole% bottoms at 1 atmosphere pressure.

  How much charge can the battery supply

What must be the area of a parallel plate capacitor, with plates separated a distance d = 0.01 mm and relative permittivity of 4 for the dielectric between the plates to supply the same charge as the battery in (a)?

  Estimate the necessary tower diameter and the pressure drop

The gas density is 0.075 lb/ft3. The liquid density is 55 lb/ft3. The viscosity of the oil is 20 centipoises. Under these conditions, estimate the necessary tower diameter and the pressure drop through the tower as inches of water per foot of pack..

  Alcohol technology 1 describe the principles of a vapour

describe the principles of a vapour adsorption refrigeration system and compare this to a vapour recompression system.

  Determine the minimum number of poles for the motor

With the number of poles decided, find the speed in r/min at which the motor-generator set will operate.

  Calculate the heat removed by the burner jacket

The burner is fitted with a cooling jacket, which cools the exit gases to 200 °C. The gases are further cooled, to 50°C, in an external heat exchanger.

  Ideal gas law air at 4mpa and 3000c enters a will

air at 4mpa and 3000c enters a will insulated turbine operating at steady state with negligible velocity. the air

  Determine the total time per cycle for minimum total cost

An overall average of 65,000 lb of water per 24-h day must be evaporated during each 30-day period. (b) An overall average of 81,000 lb of water per 24-h day must be evaporated during each 30-day period.

  Reaction which has aninduced kinetic differential equation

Construct a reaction which has an induced kinetic differential equation that has solutions defined on the whole positive half-line of real numbers and which still does not belong to any of the reaction classes above.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd