What is the tension in the string from

Assignment Help Civil Engineering
Reference no: EM13549336

A 0.4 kg mass m is rotating on a horizontal, frictionless surface, its motion constrained by a massless, inextensible string. The distance from the string's attachment point, O, to the mass is a constant. A tiny rocket in the mass exerts a constant thrust in the positive e? direction with a magnitude of 1.2 N. l = 0.6 m, and the angular velocity is initially equal to 104rad/s. What is the tension in the string from t = 0 to y = 4s ?

Reference no: EM13549336

Questions Cloud

The rain and concrete reach equilibrium rapidly : Estimate the amount of Ca(OH)2(s) leached from concrete during a one-year period by precipitation. Assume that the area receives 40 in/yr of precipitation which is in equilibrium with
What real rate of return will the investor receive : You may pay $15,000 for an annuity that pays $2500 per year for the next 10 years . You want a real rate of return of 5% , and you estimated inflation will average 6% per year. Should you buy the annuity?
X y and z coordinates of point b for radial readings taken : Calculate the X, Y and Z coordinates of point B for radial readings taken to B from occupied station A, if the backsight azimuth at A is 25°32'48", the elevation of A = 610.098 m, and hi = 1.45 m
Will you accept their hypothesis : Soil engineers hypothesize that the share of limestone in Austin’s soils is the same as that in San Antonio soils. They take 100 bore holes in each region
What is the tension in the string from : A 0.4 kg mass m is rotating on a horizontal, frictionless surface, its motion constrained by a massless, inextensible string. The distance from the string's attachment point
What is the total linear impulse acting on the bullet : The force of the expanding gases on a 0.02 kg bullet is given by f=f0-f.1*t . Initially stationary at x=0 , the bullet reaches a speed of 1000 kph by the time it exits the gun
How fast will ball c be traveling after all collisions have : Three particles are sliding along a flat, frictionless surface. mA = 0.4 kg, mB = 0.5 kg, and mC = 0.4 kg. Before any collisions take place, vA = 15i m/s, vB = 10im/s, and vC = 5 m/s
Find the location of point a on the table by calculating : A pool player wants to bank ball B off of point A into the side pocket O. The ball has a diameter d = 2.25 in. and a coefficient of restitution e = 0.8 when colliding with the side of the table. Find the location of point A
How does this result differ from the case of oblique impact : How does this result differ from the case of oblique impact with zero force interaction in the vertical direction and e=0 ?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Assume atmospheric pressure at the outlet section

The propellor is situated at the end of the tunnel wherethe area is 10 m2 (rigth before the tunnelis opened to the atmosphere). So I used the energyequation, but I have two unknows: pressure P of thetest section, and the shaft work hT orhP (I am not ..

  Determine the void content

If the dry-rodded unit weight of an aggregate is 105 lb/ft3 (1680 kg/m3) and its specific gravity is 2.65, determine the void content.

  What are the values of its density specific volume

A certain gas weighs 16.0 N/m3 at a certain temperature and pressure. What are the values of its density, specific volume, and specific gravity relative to air weighing 12.0 N/m3 ?

  Probability of pulling out vehicle at oncoming traffic

Assuming a standard driver reaction time of 2.5 seconds, what is the probability that the vehicle pulling out will get in an accident with oncoming traffic?

  Determine the controlling ct factor at the water temperature

A small city is evaluating disinfection requirements for their drinking water plant. With an average flow of 5 MGD and a peak flow of 9 MGD, determine the controlling CT factor (virus or giardia) when the water temperature is 23 degrees C.

  Calculate the mass of ammonium added to 1 l of water

Ammonium (NH4+) is a weak acid with a pKa of 9.26. The dissociation is: NH+4 NH3 + H+. Calculate the mass of ammonium added to 1 L of water in order to obtain a pH of 4 at equilibrium.

  Determine what is the necessary volume for the basin

A dry detention basin is to be designed for a 70 ha residential development. The runoff coefficient for the area is 0.3 and the average rainfall during the year is 4 cm. What is the necessary volume for the basin

  Determine flow rate of water from nozzle through pipe

4 in diameter pipeline 200ft long discharges water from nozzle with 2 in diameter jet at an elevation which is 100ft below the water level of supply reservoir. find flow rate through pipe

  Find the uniform flow depth of concrete trapezoidal channel

Find the uniform flow depth (in feet) of a concrete trapezoidal channel with a bottom width of 30 ft. and side slopes of 2:1. The channel is laid at a slope of 0.05% and carries a design discharge of 1000 cfs.

  What is the runoff rate into the inlet grate

If the detention storage on the paved section is increasing at the rate of 60 m3/hr, what is the runoff rate into the inlet grate?

  How long would site take for the clay layer to achieve

A 3m deep layer of clay is underlain by impervious rock. An extensive area of fill is to be placed over the site. How long would it take for the clay layer to achieve 90% of its total final settlement.

  Determine the moment about the pin due to the force

1.For an SO2 emission rate of 22,000 kg/day and an exhaust gas flow rate of 5.0 million m^3/hour(after the scrubber) measured at 150 C and 1atm pressure, calculate the concentration of SO2 in the exhaust gases(ppm).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd