What is the temperature change of the water

Assignment Help Mechanical Engineering

Reference no: EM13704006

Liquid water at 26.67°C flows in a straight horizontal pipe in which there is no exchange of either heat or work with the surroundings. Its velocity is 40 ft/seg in a pipe with an internal diameter of 2.54 cm until it flows into a section where the pipe diameter abruptly increases.

a) What is the temperature change of the water if the downstream diameter is 3.81 cm?

b) If it is 7.62 cm?

c) What is the maximum temperature change for an enlargement in the pipe?

Reference no: EM13704006

Questions Cloud

Considering the maximum normal stress theory : A machine component of square cross- section is subjected to a direct tensile of 20 kn and a shear load of 10 kN. Considering the maximum normal stress theory and distortion energy theory of failure calculate the dimension of the component. Take fact..

No change compared to the actual valve : Using an Erlenmeyer flask with 2ml of water instead of 50ml, would it make the experimental molarity higher, lower or no change compared to the actual valve?

Total heat flow through the copper-fiberglass combination : One side of a copper block 5 cm thick is maintained at 250*C. The other side is covered with a layer of fiberglass 2.5 cm thick. the outside of the fiberglass is maintained at 35*C, & the total heat flow through the copper-fiberglass combination is 5..

Diameter sphere is heated to a temperature : A 4.0 cm diameter sphere is heated to a temperature of 200 C & is enclosed in a large room at 20 C. Calculate the radiant heat loss if the surface emissivity is 0.6.

What is the temperature change of the water : Liquid water at 26.67°C flows in a straight horizontal pipe in which there is no exchange of either heat or work with the surroundings. Its velocity is 40 ft/seg in a pipe with an internal diameter of 2.54 cm until it flows into a section where the p..

Carbon annealed steel rod has a rectangular cross section : The company has been asked to assess the effects of a variety of engineering conditions on a selection of components, perform calculations for the components that follow. A medium carbon annealed steel rod has a rectangular cross section and must cop..

What will the total pressure become : A 9.75-L container holds a mixture of two gases at 45 °C. The partial pressures of gas A and gas B, respectively, are 0.186 atm and 0.820 atm. If 0.190 mol of a third gas is added with no change in volume or temperature, what will the total pr..

Hydrogen atoms replaced respectively with chlorine atoms : Methyl chloride, methylene chloride, chloroform, and carbon tetrachloride are all part of what group that has had one, two, three, or four hydrogen atoms replaced respectively with chlorine atoms?

Did the biker go uphill or downhill : Many bike computers tell the ride what altitude they are at and how the altitude is changing using a basic barometer and pressure differences. A biker rides on a hill and the computer reads barometric pressures of 475 mm Hg at the start and 530 mm Hg..

User Account

All Pages