User Account

All Pages

What is the temperature at the exit of the valve in oc what

Assignment Help Mechanical Engineering
Reference no: EM13630653

A refrigeration cycle uses refrigerant 134-a as the working fluid. The refrigerant enters the expansion valve as a saturated liquid at 1.00 MPa and exits the valve at a pressure of 200 kPa. What is the temperature at the exit of the valve in oC? what is the internal energy (kJ/kg) of the refrigerant at the exit of the valve?

Reference no: EM13630653

Questions Cloud

The 50-mm radius pulley a of the clothes dryer rotates : the 50-mm radius pulley a of the clothes dryer rotates with an angular acceleration of alpha 24theta12 rads2 where
Determine the horsepower input for a motor necessary to : determine the horsepower input for a motor necessary to lift a 200 kg box at a constant rate of 2 ms. the overall
The power per unit area reaching earth from the sun at the : the power per unit area reaching earth from the sun at the top of the atmosphere at the equator is 1.36 x 103 wm2 which
A steam turbine produces 3000 hp with a mass flow rate of : a steam turbine produces 3000 hp with a mass flow rate of 22000 pounds per hour. the steam enters at 1100 degf and 900
What is the temperature at the exit of the valve in oc what : a refrigeration cycle uses refrigerant 134-a as the working fluid. the refrigerant enters the expansion valve as a
A spherical capacitor is comprised of a solid inner : a spherical capacitor is comprised of a solid inner conduction sphere of radius a with positive charge q and an
An insulatedthin walled pipe of 100mm diameter is used to : an insulatedthin walled pipe of 100mm diameter is used to transport water to equipment that operates outdoors and uses
Assume the density of air is 116 kgm3 and neglect the : balloons are often filled with helium gas because it weighs only about one-seventh of what air weighs under identical
Using energy methods find the magnitude and direction of : a variable capacitor consists of two thin coaxial metal cylinders of radii a and b with b-altlta free to move with

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  What is the difference between the pressure that is acting

a fairing for an optically perfect window for an airborne telescope is being tested in a wind tunnel. a manometer is

  The system is at rest in the position shown with the 12-lb

the system is at rest in the position shown with the 12-lb collar a resting on the spring k 20 lbft when a constant

  The turbine and pump have isentropic efficiencies of 88 for

water is the working fluid in a vapor power cycle. the pressure and temperature at the turbine inlet are 1600 psia and

  Determine the minimum no of teeth required

Determine the minimum no of teeth required on pinion in order to avoid interference which is to gear with 1 a wheel to give a gear ratio of 3 to 1

  State whether each member is in tension or compression

Determine the force in each of the members connecting joints A through F of the vaulted roof truss shown. State whether each member is in tension or compression.

  The temperature outside is 0 c if it is calm and the heat

suppose you are outside on a cold day with no gloves. assume your hands have an area of 0.01 m2. the temperature of

  Determine the fluid viscosity of the substance

A plate, 0.001 in distant from a fixed plate, moves at 2 feet per seconds and requires a force of 0.04l bar per feet square to maintain this speed. determine the fluid viscosity of the substance between the plate.

  Assume that the internal energy and specific volume of

the pressure of 200 kgs of water is to be increased from 1 atm to 4 mpa. the water enters through a 20-cm-diameter pipe

  What is the speed when the object has moved 25 m if

a 20 kg object is pulled across a flat surface with a force of 100 n. the force is applied at a 30deg angle to the

  One of the problems of wind tunnel testing at airspeeds

one of the problems of wind tunnel testing at airspeeds near sonic speed is the large effect on the flow conditions of

  Calculate w, q and delta s for the process

Steam at 1000kPa and 300deg C expands to a pressure of 150kPa in a cylinder. If PV = constant during the process, calculate W, Q and delta S for the process.

  Heated air at 1 atm and 100 degrees f is to be transported

heated air at 1 atm and 100 degrees f is to be transported in a 400 ft long circular plasitc duct at a rate of 12ft3s.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd