What is the speed of ambulance

Assignment Help Physics
Reference no: EM13312014

As you stand motionless on the sidewalk, you hear an ambulance siren broadcasting a shrill 610hz sound while it is approaching, and 521 hz sound while it is receding.

A) What speed is the ambulance?

________________m/s

B) What would be the beat frequency of a signal created by the superposition of these two signals?

____________Hz

Reference no: EM13312014

Questions Cloud

Explain liquid hcn is unstable with respect to trimer : Liquid HCN is unstable with respect to trimer formation. What would be the structure of this trimer
Write a computer program to calculate deflection at midpoint : Two 52 kN loads are maintained 2.5 m apart as they are moved slowly across beam AB. Write a computer program to calculate the deflection at the midpoint C of the beam for values of x from 0 to 9 m, using .5 m increments.
How to select economical solid rectangular timber beam made : A simply supported beam is to span 12 feet. It will support a uniformly distributed load of 800 pounds per linear foot over the full span and a concentrated load of 1000 pounds acting at 4 feet from the left support.
Explain the enthalpies of bond formation to rationalize : Use the enthalpies of bond formation to rationalize why nitrogen forms a dimer and phosphorous a tetramer.
What is the speed of ambulance : As you stand motionless on the sidewalk, you hear an ambulance siren broadcasting a shrill 610hz sound while it is approaching, What speed is the ambulance
Calculate the total cost using a one-month planning : Calculate the total cost using a one-month planning horizon and calculate the total cost using a three-month planning horizon.
Explain what is the empirical formula of the phosphorus : A 46.2mg sample of phosphorus reacts with selenium to form 135mg of the compound. What is the empirical formula of the phosphorus selenide
How to select the lightest steel wide flange section : The span length is 32 feet. Total deflection is not to exceed span/240. Select the lightest (economical) steel wide flange section (W shape) with a yield stress of 50 ksi. Assume the beam weight to be 200 PLF
What is the maximum safe initial angle : Walking by a pond, you find a rope attached to a tree limb 6.0 m off the ground. You decide to use the rope to swing out over the pond. What is the maximum safe initial angle between the rope and the vertical so that it will not break during the swi..

Reviews

Write a Review

Physics Questions & Answers

  What is the angular size of the moon

The Moon has an angular size of 0.50 ? when viewed with unaided vision from Earth. What is the angular size of the Moon as seen through this telescope

  What is the angular speed after coupling

Two disks are mounted on frictionless bearings on the same axle and can b brought together so that they can couple and rotate as one unit. what is the angular speed after coupling

  Find the output current of the secondary coil

The primary coil of an ideal transformer has 710 turns, and the secondary coil has 190 turns. find the output current of the secondary coil

  Find the altitude above which wispy cirrus clouds can occur

Puffy cumulus clouds, which are made of water droplets, occur at lower altitudes in the atmosphere. Find the altitude y (measured from sea level) above which wispy cirrus clouds can occur.

  What must be the stantard deviation per 100 ft tape lenght

An oscillating LC circuit has a current amplitude of 7.50 mA, a potential amplitude of 250 mV, and the capacitance of 220 nF. What are (a) the period of oscillation.

  Where does the ball hit the ground

Tilted Land is flat, much like Western Utah, but in Tilted Land gravity does not point straight down! Where does the ball hit the ground

  Imagine that the rod has a slightly flattened bottom

A metal rod of mass 50 and electrical resistance 0.10 rests on parallel horizontal rails that have negligible electric resistance. The rails are a distance = 10.0 apart. The rails are also connected to the voltage source providing a voltage of = 5..

  Find the width of the central maximum

Ligh of wavelength 610 nm is incident on a slit 0.20 mm wide, what is the width of the central maximum

  Calculate the potential difference between the two plates

Two plates of area 30.0 cm2 are separated by a distance of 0.0150 cm. calculate the potential difference (voltage) between the two plates

  What is the current in the solution

Two electrodes are placed in a calcium chloride solution and a potential difference is maintained between them. what is the current in the solution

  Explain how far up the incline will the block move before

It is then projected up the same plane with an initial speed 4.40 m/s. Explain how far up the incline will the block move before coming to rest?

  What is the velocity of the 1st blcok

A block of mass .250 kg traveling at (1.0 m/s)y hits a second block with a .375 kg mass travelling at (1.2m/s)x, What is the velocity of the 1st blcok after they hit each other

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd