What is the specific volume of the mixture

Reference no: EM13535668

1.One of the last major offshore construction activities is to set the production topsides onto the floating Spar. If the Spar is 140 feet in diameter, how much will it sink down as a 12000 ton topsides deck is set?

2.What is the weight of a 20 ft diameter hollow sphere with 1 ft thick walls (Assume concrete weighs 4000 lbs/yard)?

3.Here is the problem:When measuring a distance AB, the first taping pin was placed 1.5ft to the right of line AB and the second pin was set 1.5 ft left of line AB. The recorded distance was 236.89 ft. ( Assume 3 taped segments, the first two 100 ft each.)Calculate the corrected distance.

4.100g of water are mixed with 150g of another fluid (density = 790 kg/m3 ). What is the specific volume of the mixture, assuming that the volumes are additive and the mixture is homogeneous?

a) 0.63 cm^3/g

b) 0.82 cm^3/g

c) 0.88 cm^3/g

d) 1.20 cm^3/g

Reference no: EM13535668

Questions Cloud

Determine the average normal stress in each post : The center post B of the assembly has an original length of 124.7mm, whereas posts A and C have a length of 125mm. If the caps on the top and bottom can be considered rigid

You are the chief civil engineer for the enhanced : You are the Chief Civil Engineer for the Enhanced Protein Production Plant on the planet Zog where the gravitational constant is 15 ft/s2. A protein storage tank has developed a structural problem and must be drained. There is a 6 inch diameter orifi..

What speed in mph is required : A steam locomotives had scoops installed that took water from a tank located between the tracks and lifted water into the tender. To lift the water 12 ft with a scoop, neglecting all losses, what speed in mph is required?

Determine the maximum value of dz if the flow is to remain : Water flows downhill through a 3 in. diameter steel pipe. The slope of the hill is such that for each mile (5280 ft) of horizontal distance, the change in elevation is Δz.

What is the specific volume of the mixture : Water are mixed with 150g of another fluid (density = 790 kg/m3 ). What is the specific volume of the mixture, assuming that the volumes are additive and the mixture is homogeneous?

Derive this equation from the basic material : Absolute value signs serve as a reminder that, at this point Td and Te must be expressed as absolute temperatures.

Disregard the glass and any other mass and find entropy : Argon in a light bulb is at 110kPa, 70 degrees celsius. The light is turned off, so the argon cools to the ambient 20 degrees celsius. Disregard the glass and any other mass and find the specific entropy generation.

What must the driver’s eye height in the van be for the : A 1200 ft. equal tangent crest vertical curve is currently designed for 50 mi/hr. A civil engineering student contends that 60 mph is safe in a van because of the higher driver’s eye height. If all other design inputs are standard, what must the driv..

What is the rate of entropy generation during this process : Liquid water is to be pumped by a 10-kW pump from 100 kPa at a rate 5 kg/s. What is the highest pressure the water can reach at the exit? Neglect the kinetic and potential energy change of the water. Take the specific volume of water as constant at 0..

User Account

All Pages