What is the smallest diameter particle of specific gravity

Assignment Help Civil Engineering
Reference no: EM13317850

a.) What is the terminal settling velocity of a particle with a specific gravity of 1.4 and a diameter of 0.01 mm in 20 degrees celcius water?

b.) Would particles of the size in part (a) be completely removed in a settling basic with a width of 10 meters, a depth of 3 meters, a length of 30 meters, and a flow rate of 7,500 m3/day?

c.) What is the smallest diameter particle of specific gravity 1.4 that would be removed in the sediment basin described in part (b)?

Reference no: EM13317850

Questions Cloud

Calculate what is the volume of rock in the rock pile : A storage pile of crushed rock is 100ft by 100ft square at its base and 50 ft by 50 ft square on the top. The pile is 25 ft high. What is the volume of rock in the rock pile
Calculate the torque about the midpoint of the dipole : An infinite line of positive charge lies along the y axis, with charge density 1.90 microcoulombs/m. Calculate the torque about the midpoint of the dipole
Describe four parts of the external environment and how they : When setting prices, the company must consider its external environment. Describe four parts of the external environment and how they affect businesses.
Calculate the magnitude and direction of horizontal force : calculate the magnitude and direction of the horizontal force exerted on the contraction (not on the water). Assume that there is no loss of energy in the contraction. Use the gamma of water is equal to 1000 kg/m^3
What is the smallest diameter particle of specific gravity : What is the terminal settling velocity of a particle with a specific gravity of 1.4 and a diameter of 0.01 mm in 20 degrees celcius water. What is the smallest diameter particle of specific gravity 1.4
Determine time to reach maximum height : A projectile is fired with an initial speed of 113 m/s at an angle of 60 degrees above the horizontal, from the top of a cliff which is 49.0 meters high. determine time to reach maximum height
Calculate the total head the pump is pumping against : A pump has the following pump curve is pumping at a rate of 5000gpm. Calculate (a) the total head the pump is pumping against. (b) brake horsepower required to drive the pump.
What is the weight of the truck : A small ferryboat is 4.00 m wide and 6.00 m long. When a loaded truck pulls onto it, the boat sinks an additional 4.60 cm into the river
Write an m-file to calculate the factorial function of n : Write an M-file to calculate the factorial function of N!, as defined by: N!=1 N=0 N!=N*(N-1)*(N-2)*...*3*2*1 N>0 The MATLAB code to calculate N factorial for positive value of N would be n_factorial=1

Reviews

Write a Review

Civil Engineering Questions & Answers

  What foundation information should be provided as duties

You are the Engineer of record for a large heavy construction foundation project in the Boston Harbor Area. What foundation information should you be providing as part of your duties

  Determine the allowable value of the tensile load p

A steel bar serving as a vertical hanger to support heavy machinery in a factory is attached to a support by the bolted connection. The main part of the hanger has a rectangular cross section with width b1 = 1.5 in. and thickness t = 0.5 in.

  Find how much would the pressure in the tank increase

A rigid tank contains 5kg of water at 20 degrees Celsius. A gage on the tank reads 200kPa. Determine a) the volume of the tank, b) How much would the pressure in the tank increase if the temperature were increased to 50 degrees Celsius.

  What is the stress in the lowermost rock

The Washington Monument is 169 m tall. What is the stress in the lowermost rock if it is made of Georgia granite?

  Calculate the deflection of the beam

Also calculate the deflection of the beam to check that it complies with the design limit of L/200. Only variable actions are required for deflection check.

  Determine undrained shear strength on compacted soil sample

An unconfined compression test was conducted on a compacted soil sample, 50 mm diameter by 100 mm long. The peak axial force recorded was 230 N and the sample shortened by 2 mm.

  What is the max length to which it may be stretched

For an unknown alloy the stress at which plastic deformation begins is 400MPa and the modulus of elasticity is 120GPa. If the original specimen length is 76 mm, what is the max length to which it may be stretched without causing plastic deformatio..

  Calculate the forces exerted by the water on the bend

Water flows through a horizotal 45 deg reducing bend with a 36 inch. diameter upstream and a 24 inch diameter downstream, at the rate of 20 cfs under a pressure of 15 psi at the upstream end of the bend. Neglecting head loss in the bend, calculate..

  What are the efforts of work hardening of work materials

What are the effects of hardness, hot strength and hot hardness and work hardening of work materials

  Explain how to determine the power output of the turbine

The water enters at 1 atm at 10 C and the flow rate through the turbine is 40 m3/s. The water is discharged from the turbine 200 m below the intake at 1 atm and the temperature of the water at the discharge is 10.2 C.

  How far does a horizontal plane depart from a level surface

The width of a lake is 16 km (it is a flat plane tangent to the radius of the sphere). How far does a horizontal plane depart from a level surface if the earth is a sphere with r=6371km

  Determine the modulus of elasticity of the material

A tensile test was performed on a metal specimen having a circular cross section with a diameter of 0.50 inch. The gage length is 2 inches. For a load of 13.5 kips, the elongation was 4.66 x 10-3 inches.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd