What is the rate of work if isentropic efficiency

Assignment Help Mechanical Engineering

Reference no: EM13718938

A turbine receives 10 kg/s of steam at a state of p1 = 5 bar, t1 = 400?c and exhausts to a pressure of p2 = 1.5 bar. The ambient temperature is t0 = 30⁰c and the ambient pressure is p0 = 1 bar. What is the rate of work if isentropic efficiency is 75%?

Reference no: EM13718938

Questions Cloud

Suitable face width based on an allowable bending stress : A steel spur gear has a module of 1 mm and 16 teeth cut on the 20° full-depth system and is to carry 0.15 kW at 400 rev/min. Determine a suitable face width based on an allowable bending stress of 150 MPa. Use the first approximation equation for ben..

Compute the modulus of elasticity for the nonporous material : The modulus of elasticity for a ceramic material having 5 vol% porosity is 296 GPa (43x10^6 psi). (a) Compute the modulus of elasticity for the nonporous material. (b) At what volume percent porosity will the modulus of elasticity be 231 GPa (33x10^6..

Determine the isentropic compressor efficiency : An air compressor operates under steady conditions. Air is compressed from an initial state of 295 K and 101 kPa to a final state of 430 K and 340 kPa. Ignore heat transfer between the compressor and surroundings and ignore kinetic energy and potenti..

Calculate the turbines isentropic efficiency : Water vapour enters an adiabatic turbine at a flow rate of 820 L/s. The turbine expands the water from 10 MPa and 600oC to 8 kPa and a quality of 0.9. Kinetic energy and potential energy effects can be ignored.

What is the rate of work if isentropic efficiency : A turbine receives 10 kg/s of steam at a state of p1 = 5 bar, t1 = 400?c and exhausts to a pressure of p2 = 1.5 bar. The ambient temperature is t0 = 300c and the ambient pressure is p0 = 1 bar. What is the rate of work if isentropic efficiency is 75%..

Determine the maximum shear stress in the shaft : A hydrofoil boat has an AISI 1020 Hot Rolled steel propeller shaft that is 100 ft. long. It is connected to an in-line diesel engine that delivers a maximum power of 2500 hp and causes the shaft to rotate at 1700 rpm. If the outer diameter of the sha..

Determine the resulting mixtures volume : 77 lbm of a gas whose density is .0007 lbm/ft^3 is mixed with 1.81 lbm of a gas whose density is .0018 lbm/ft^3 such that the pressure and temperature of the gases do not change. Determine the resulting mixtures volume (ft^3) and specific volume (ft^..

Volumetric analysis of a mixture of a mixture of gases : The volumetric analysis of a mixture of a mixture of gases is 30 percent oxygen, 40 percent nitrogen 10 percent dioxide, 20 percent methane. This mixture flows through a 1-in-diamter at 1500 psia and 70F with a velocity of 10 ft/s. Determine the volu..

Determine the pressure after the first stage compressor : A two-stage compressor is used to compress air from 100 kPa at 298 K to 900 kPa at a rate of 0.5 kg/s. After the first stage compressor, an intercooler isobaric ally cools the air to 350 K before entering the second compressor stage.

User Account

All Pages