What is the rate of irreversibility

Assignment Help Civil Engineering
Reference no: EM131233682

1. Apply the exergy equation to solve Problem 8.18.

Problem 8.18

A refrigerator should remove 1.5 kW from the cold space at -10?C while it rejects heat to the kitchen at 25?C. Find the reversible work.

2. Apply the exergy equation to solve Problem 8.35 with T0 = 20?C.

Problem 8.35

A 20?C room is heated with a 2000-W electric baseboard heater. What is the rate of irreversibility?

Reference no: EM131233682

Questions Cloud

Find the total exergy destruction in the process : Ammonia, 2 kg, at 400 kPa, 40?C is in a piston/ cylinder together with an unknown mass of saturated liquid ammonia at 400 kPa. The piston is loaded, so it maintains constant pressure, and the two masses are allowed to mix to a final uniform state ..
Determine the required weights of cement : Determine the required weights of cement, fine aggregate, coarse aggregate, and volume of added water for an 8-cy batch.
Describe the role the patient history and physical exam : Describe the role the patient history and physical exam (information from above) played in the diagnosis (of Crohn disease) Then, suggest potential treatment options based on your patient diagnosis (Crohn disease).
Consider the linear optimization problem : Consider the linear optimization problem with inputs x, y and constraints.
What is the rate of irreversibility : A refrigerator should remove 1.5 kW from the cold space at -10?C while it rejects heat to the kitchen at 25?C. Find the reversible work.
Describe project management knowledge areas : Objectives Covered - understand the project life cycle: initiation, planning, executing, controlling and closing, describe project management knowledge areas and process groups and apply project management software to help plan and manage information..
Determine the quantities of materials required per cubic : Determine the quantities of materials required per cubic yard to create a concrete mix. - The specifications require a maximum size aggregate of 1.
Find all the fluxes of exergy in the refrigerator : The refrigerator in a kitchen shown in Fig. 5.7 receives electrical input power of 150 W to drive the system, and it rejects 400 W to the kitchen air. Find the rate of energy taken out of the cold space and the COP of the refrigerator.
State what you expect to be the results of the lab procedure : A hypothesis is an educated guess. Based on what you have learned and written about in the Introduction, state what you expect to be the results of the lab procedures.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine magnitude of unbalanced force acting on particle

The path of motion of a 7-lb particle in the horizontal plane is described in terms of polar coordinates as r= (3t+2) and theta=(0.2t^2-t) , where t is in seconds. Determine the magnitude of the unbalanced force acting on the particle when t=3s.

  Estimate the overall dimensions

Provide a reasonable design for a 99.4% efficient ESP treating 30,000 m^3/min of gas. The dust has a resistivity of 7.1 (10)^10 ohm-cm. Specify the total plate area, channel width, number and size of plates

  Design the traffic pole only vertical element

The maximum wind pressure on the traffic sign is 200 kg/m2. The maximum allowable shear stress is 350 kg/cm2. Design the traffic pole (only vertical element) against torsion knowing that angle of twist at the base

  Determine the principal stress at point a on cross section

Determine the principal stress at point A on the cross section of the arm at section a-a . Specify the orientation of this state of stress and indicate the results on an element at the point.

  What will cars maximum acceleration rate be on level road

A 3000-lb car is traveling on a paved road with Cd (coefficient of drag) = 0.35, Af (frontal area of the vehicle) = 21ft^2, and p(air density)=0.002378 slugs/ft^3. Its engine is running at 3000rpm and is producing 250ft-lb of torque.

  Find the minimum number of coins he has

According to his will: First give one coin to manager. 1/5th of the remaining to the elder son. Now give one coin to the manager and 1/5th of the remaining to second son and so on..... After giving coins to 5th son, divided the remaining coins among ..

  How much of a reduction in terminal time would be required

Determine how many buses needed to provide service on the following route with the indicated characteristics:

  Dry unit weight of material

A soil borrow material in its natural state in the ground has a unit weight of 118pcf. Its natural water content is 7%. What is the dry unit weight of this material?

  1 draw a plan of a typical strip mine showing all

1. draw a plan of a typical strip mine showing all operational features and equipment.2. answer the followinga. why is

  Calculate ultimate bod where discharge and river meet

Wastewater from a paper mill contains ultimate BOD of 200ppm and DO of 3ppm, water is discharged at a rate of 100,000 gallons per day into a river, the river has a flow of 1 million gallons per day with no BOD

  What friction factor can be expected for a flowrate

When the flowrate in a certain smooth pipe is 0.14 cubic meters per second, the friction factor is 0.06. What friction factor can be expected for a flowrate of 0.71 cubic meters per second?

  Determine flow rate into or out of each reservoir

Three reservoirs are connected by three pipes with hA = 100 f t, hB = 20 f t, hC = 0 f t, l1 = 1000 f t, l2 = 500 f t, l3 = 400 f t and D1 = D2 = D3 = 1 f t. Determine flow rate into or out of each reservoir if friction in each pipe is 0.02.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd