User Account

All Pages

What is the pump inlet condition for a rankine cycle the

Assignment Help Mechanical Engineering
Reference no: EM13614509

A power plant using steam as the working fluid operates on a Rankine cycle. The temperature at the condenser exit is 80C and the conditions at the turbine inlet are 500 C and 2000 kPa. Assume all components are reversible. Find: (a) the condenser pressure (kPa); (b) the pump work (kJ/kg). What is the pump inlet condition for a Rankine cycle?; (c) the heat added by the boiler (kJ/kg); (d) the cycle efficiency; (e) the efficiency of a Carnot cycle operating between the same temperature limits.

Reference no: EM13614509

Questions Cloud

Discounted cash flow methods provide a more objective basis : 1. who determine the market price of a share of common stock?a. the board of directors of the firmb. the stock exchange
A flash unit for a camera has a capacitance of 1155 microf : a flash unit for a camera has a capacitance of 1155 microf. what resistance is needed in this rc circuit if the flash
It is necessary to maintain a pressure of 180 psi at the : at a ski resort water at 40 f is pumped through a 3-in diameter 2000ft long steel pipe from a pond at an elevation of
At what distance along the central axis of a uniformly : at what distance along the central axis of a uniformly charged plastic disk of radius r 0.110 m is the magnitude of
What is the pump inlet condition for a rankine cycle the : a power plant using steam as the working fluid operates on a rankine cycle. the temperature at the condenser exit is
Coefficient of linear expansion for brass ignore any : a very thin sheet of brass contains two thin parallel slits. when a laser beam shines on these slits at normal
The percent a company adds to its cost of sales to : the following data in thousands of dollars were adapted fromthe december 31 2006 financial statements of tootsie
Two concentric metallic shells conductors have radii r and : two concentric metallic shells conductors have radii r and 2r respectively. a charge q is placed on the inner shell and
Air at 80f and standard atmospheric pressure flows through : air at 80f and standard atmospheric pressure flows through a furnace filter with an average velocity of 2.4 fts. the

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  What is the heat rejection for the condenser in btuh if the

consider a small simple rankine power cycle which produces 600kw power from an electric generator with an efficiency of

  A cascade system using two ideal refrigeration cycles is

in cooling situations where the desired temperature range is large two refrigeration cycles can be stacked to create a

  It bums in a steam generator with 115 percent theoretical

a gaseous fuel has the following volumetric analysis 90 methane ch4 5.0 ethane c2h6 and 5nitrogen. it bums in a steam

  Determine the horizontal line along

Determine (a) the horizontal line along which the shearing stress is a maximum, (b) the constant k in the following expression for the maximum shearing stress.

  Calculate the kg mix- ture from the mixer

calculate the kg mix- ture from the mixer, kg water evaporated, and kg jam produced.

  What is the maximum velocity that the car can achieve

a driver of a car is driving around in circles with a diameter of 100 ft. the driver is traveling 20 mpg when he

  Find the turbine isentropic efficiency

Find the turbine's (b) isentropic efficiency (%), (c) reversible work (kJ/kg), (d) irreversibility(kJ/kg), and (e) exergy destruction (kJ/kg). (f) Draw a T-s diagram of the process

  Steam enters a diffuser at 20 psia and 240of with a

steam enters a diffuser at 20 psia and 240of with a velocity of 900 fts and exits as saturatednbspvapor at 240of and

  Determine the largest load p

A knowing that the normal stress magnitude in each link is not to exceed 24 ksi, the shearing stress in pin F is not to exceed 15 ksi, and the deflection of point A is not to exceed .08 in.

  Calculate the neutral point

Explain the characteristics of the Phugoid motion. What is the governing aerodynamic derivative which determines the convergence or otherwise of the motion?

  Determine the absolute pressure of the water at the ground

the water level in a sealed tank is 26 m above the ground. the pressure in the air space above the water is 0.25 mpa

  A steel tape is used to measure a distance of 20 m at a 10

a steel tape is used to measure a distance of 20 m at a 10 0c. assuming that the tapenbspwill measure the true distance

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd